Passive UHF Label RFID Programmable Sticker RFID Luggage Tag for Air Transport

Min.Order: 10,000

Product origin: Quanzhou, Fujian, China

Infringement complaint:

Complaint

US$ 0.06 ~ 0.12

Description

RFID technology can quickly collect detailed information during the baggage handling process, reduce baggage error rates, and share this data in real-time, allowing staff and passengers to keep track of the status of checked baggage at any time.

The existing optical scanning technology has low efficiency and significant limitations. Compared to optical scanning, the most obvious advantage of RFID technology is that it can read multiple baggage labels simultaneously, and is easy to operate, high in accuracy, and can expand its application range.

The application of RFID technology can improve the efficiency of on-site operation scanning, and the time to scan a piece of
luggage has been reduced from 7 seconds to 1.5 seconds today;

Can achieve efficient data collection and high-precision luggage tracking;

To maximize the detection of baggage errors caused by human factors and further reduce the baggage error rate, it is expected to
reduce by an additional 5%.

Luggage strip RFID chip (Inlay) parameter requirements:

Compliance with standards: RFID luggage tags comply with industry standards IATA R740, IATA RP1740a, and IATA RP1740c, and product standards meet EPC Class 1 Gen 2 and ISO/IEC18000-6c. RFID luggage tags must comply with the requirements of the "Civil Aviation Luggage Transport Radio Frequency Identification Specification" (MH/T 1025-2009) and be compatible with AEA standards.

1. Chip storage area: (1) EPC: 128Bits and above readable and writable;

(2) TID: 48 Bits and above are readable but not writable (3) Password area: 64 bits and above access/destruction passwords can be read and written; (4) USER area: 512 bits and above readable and writable; 2. Suitable carrier frequency: 860-960MHz

3. Working mode: passive

4. Chip anti-static (ESD) performance: 2000V (maximum)

5. Reading sensitivity (900-925MHZ): not less than -18dBm
6. Directionality (in 0-360 degree rotation testing): 6m ≤ recognition distance ≤ 8m

7. The center position of the chip is 121mm ± 4.5mm away from the right side of the bottom paper (feeding side)

8. Size: The baggage status on the sorting line is unstable. To ensure the baggage sorting recognition rate, it is required that the size of the RFID baggage tag's Inlay should not be less than 75cm and the width should not be less than 30cm;

9. Antenna manufacturing method: The antenna is manufactured using environmentally friendly processes such as etching or above.

Technical standards for luggage tags

1. The surface material of the thermal sensitive luggage is a thermal recording material, and the base paper is 65g/m2 ± 5g transparent grazin release paper; Paper tension: The longitudinal and transverse tensile torque of the material should reach 500N ± 20N, with moderate hardness and comfortable use; Light transmittance: The light transmittance of silicone substrate labeled cannot be less than or equal to 18%; Overall thickness: The total thickness cannot exceed 270 um; Usage temperature: -1 ° C -40 ° C, normal viscosity; Glue: No overflow or irritating odor during use; Peeling force requirement: It is required to select adhesive suitable for use within the temperature range of -20 ºC to 70 ºC, with a peeling force of not less than 3.5 ± 0.2N/25mm; Other requirements: Luggage strips should be waterproof, oil resistant, alcohol resistant, and non powdery; No visible coating marks or paper lines; Printers with ordinary sensitivity to external forces will not emit color if touched or scratched;

2. The paper has a width of 54mm and a length of 501.65mm. The outer diameter of the finished roll should not exceed 175mm, and the core diameter inside the roll should be 76.2mm.

3. The product's header graphics and text are printed clearly, the ink is environmentally friendly, and the color is bright. The same side printing and overprinting should be accurate, with a tolerance of 0.2mm, and the front and back overprinting should have a tolerance of 0.5mm; The printing color of the same batch of products should be consistent, and the surface of the paper should be clean, without dirty spots, scratch lines, or color development due to collisions; Die cutting specifications according to customer requirements (error -0.3mm); The die-cutting movement of the same batch of products is ≤ 1mm, and the detection hole movement is ≤ 0.5mm; Semi transparent die-cutting: The top paper die-cutting cannot cut through the bottom paper, and the bottom paper die-cutting cannot cut through the top paper; Other requirements: There should be no black residue falling off when printing on the face paper, and no residue transmitted to the printing head. The edges of the image and text should be neat, and there should be no jagged or white spot defects observed with a magnifying glass.

4. Roll packaging: The winding direction is consistent, and the surface of the paper core is smooth without fuzzing or peeling, with an error of -3mm from the product width; Cutting should not have burrs, and the end face should be flat with an allowable error of 0.3mm and an inner diameter of+0.3mm; The product should be clean inside and outside, and there should be no wrinkles, broken edges, edges, sand or other debris inside. There should be no missing labels, and the glue should not overflow; The quantity of each roll is required by the number of packages, and an additional sheet is allowed.

1. What is MOQ?
Mind makes OEM/wholesale, so the MOQ is 1000 pcs of sticker.

2. Can I order if quantity less than MOQ?
Yes and it would be taken as sample order to production. We take more serious on sample order.

3. Can I get Free Samples?
---Yes.
If samples we have in stock would be provided for testing, but shipment should at your side.
If samples are needed to customize with your logo and designs, please send us designs and advise chip, quantity, and any other
details required. Thank you.

4. Can I order with my logo printing, size and shape?
Yes, of course it can. We do OEM. And the original artwork prefer in Abode Illustrator, PDF, CDR9 or CDRX4. In PSD is ok, DPI should over 300.
Quick to solve problems, creative to design new items, newest RFID items are available here.
Cost-effective and flexible to adjust production for volume and urgent orders.

5.How do you guarantee the printing color correctly?
At least 95% matched color with customer vector design file/original card for CMYK 4c printing, pantone printing and silk-screen printing.