| Product parameter |
| Project | Parameter |
| OFF indicates the maximum voltage | 2.0 V |
| Maximum leakage current | 1 mA |
| Maximum capacitive load | 1μF |
| Maximum cable length | 20 m |
| Shell protection | IP65 |
| Operating ambient temperature | -10 ºC +50 °C( Freeze-free) |
| Storage ambient temperature | -25 ºC +60 °C( Freeze-free) |
| Operating relative humidity | 35 ~85 % Rh(non-condensing) |
| Storage relative humidity | 35 ~95 % RH |
| Bient light selfburning lamp | 1500 lx or below |
| Vibration | 10 ~ 55 Hz, 0.7mm compound amplitude, 20 frequency sweeps in X, Y and Z directions |
| Impact | 100 m/s (about 10 G) 16 ms pulses, 1000 in each axis in the X, Y and Z directions |
| Material | Main device (internal support pressed wrong aluminum, stainless steel shell) |
| Mask PC |
| Project | Parameter |
| Minimum measured object | Diameter 30, 40, 50, 70, 150 mm (depending on setting) |
| Detectable Angle | 270(° -45°~ 225°) |
| Response time (ON to OFF) | Default: 120ms(40 ms to 400 ms) |
| Recovery time (OFF to ON) | Default: 120ms(40 ms to 400 ms) |
| Standard scan period | 40ms |
| Maximum monitoring area | 50m(standard white reflective panel) |
| Maximum detection distance(According to test specimen size) | 4m (40mm specimen) 8m(80mm specimen) 12m(120mm specimen) |
| Type of light source | 905nm infrared laser |
| Laser classification | 1 type IEC / EN 60825-1: 2014 |
| Rated supply voltage | 24 V DC ±10 % |
| Power consumption | Max. 10W (excluding load) |
| Output mode | Two-way PNP or NPN (can be set according to the software) |
| Maximum load curren | t 100 mA |
| Residual voltage (ON period) | Max 2.5V |
Complaint
