with White PE Probe Sht30-RS485 Temperature Humidity Sensors for HVAC

Min.Order: 2

Product origin: Shenzhen, Guangdong, China

Infringement complaint:

Complaint

US$ 1 ~ 25

Description

SHT30--RS485 Temperature Humidity Sensor Probe

Sensor	SHT30--RS485 0X44/0X45 i2C
Cable	PVC cable*4C
Cable length	2000mm
Wire ending	Stripped tinned or Connector

More Specifications

Sensor	SHT40, SHT45, SHT31, SHT30, SHT35, SHT20, SHT21, DHT20, DHT11, DHT22 etc
Cable	PVC cable, Silicone cable, TPE Flat Jacket cable, PVC Cold-resistant Jacket cable, or another
Probe	Stainless steel probe, Ceramic Case, Brass probe, PE, or customized
Connector	Aviation plug, PH, XH, SM, EL, Pin terminal, TE, Molex, Terminal blocks, OD2.5mm stereo plug, OD3.5mm stereo plug, 0508 terminal, fork terminal, stereo plug, RJ11/12/45 connector, or another
Length	1m, 1.5m, 2m, 5m, 10m, 20m, 100m or customized

Click here to get a datasheet........

This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens® SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test.
The SHT20 I2C temperature & humidity sensor adopt Sensirion techniques. Except the humidity sensor of capacitive type and the temperature sensor of band gap , SHT20 contains an amplifier, A/D converter, OTP memory and a digital processing unit. Compared with early SHT1x series and SHT7x series, SHT20 shows a strong reliability and long-term stability. It can measure surrounding environment temperature and relative air humidity precisely.
The Arduino SHT20 waterproof temperature & humidity sensor adopts dual waterproof protection techniques. The inner PCB has perfusion and encapsulation protection, and the probe enclosure is made of PE waterproof materials. This is a special waterproof breathable material that allows water molecules to seep in while blocking water droplets from seeping in at the meantime. The sensor won't be damaged even after a long time submerge in the water. There is also a built-in 10k Pull-up resistor and 0.1uf filter capacitor. It enables the sensor to be directly used with the microcontroller such as Arduino. We recommend DFRobot Gravity 4Pin Sensor Adapter convenient.

Application:

1. HVAC

2. Consumer goods

3. Weather stations

4. Test & measurement

5. Automation Medical

6. Humidifiers

7. Greenhouse

8. Cold-chain transportation

9. Detection of Soil

and so on.....