OEM Mono Pump Shaft Seal Mg1-40mm OEM Carbon Stationary Ring

Min.Order: 5
Product origin: Ningbo, Zhejiang, China
Infringement complaint: complaintComplaint
US$ 2

Description


WMG1 Elastomer bellow mechanical seal replaced MG1


WMG1 is the most common rubber bellows mechanical seals allow for fast and easy installation. it is also be used as multiple seal in tandem mechanical seals in two sets arrangement. Mechanical Seal WMG1 is widely used in Chemical standard pumps, screw pumps, slurry pumps and Petroleum chemical industry.




Replacement for below mechanical seals:
 B02,  MG1,  190

Features

  • For plain shafts
  • Single and dual seal
  • Elastomer bellows rotating
  • Balanced
  • Independent of direction of rotation
  • No torsion on bellows
  •  
Advantages
  • Shaft protection over entire seal length
  • Protection of seal face during installation due to special bellows design
  • Insensitive to shaft deflections due to large axial movement ability
  • Universal application opportunities
  • Important material certifications available
  • High flexibility due to wide offer on materials
  • Suitable for low-end sterile applications
  • Special design for hot water pumps (RMG12) available
  • Dimension adaptions and additional seats available



Operating range
Shaft diameter:
d1 = 10 … 100 mm (0.39" ... 3.94")
Pressure: p1 = 16 bar (230 PSI),
vacuum ... 0.5 bar (7.25 PSI),
up to 1 bar (14.5 PSI) with seat locking
Temperature: t = -20 °C … +140 °C
(-4 °F … +284 °F)
Sliding velocity: vg = 10 m/s (33 ft/s)
Admissible axial movement: ±2.0 mm (±0,08")

Combination Materials
Rotary Face 
    Carbon graphite resin impregnated 
  Hot-Pressing carbon 
  Silicon carbide (RBSIC) 
 Stationary Seat 
  Aluminium oxide (Ceramic) 
  Silicon carbide (RBSIC) 
  Tungsten carbide 
Auxiliary Seal      
  Nitrile-Butadiene-Rubber (NBR) 
  Fluorocarbon-Rubber (Viton) 
  Ethylene-Propylene-Diene (EPDM) 
Spring
  Stainless Steel (SUS304) 
 Metal Parts
  Stainless Steel (SUS304) 



Recommended applications
  • Fresh water supply
  • Building services engineering
  • Waste water technology
  • Food technology
  • Sugar production
  • Pulp and paper industry
  • Oil industry
  • Petrochemical industry
  • Chemical industry
  • Water, waste water, slurries
  • (solids up to 5 % by weight)
  • Pulp (up to 4 % otro)
  • Latex
  • Dairies, beverages
  • Sulfide slurries
  • Chemicals
  • Oils
  • Chemical standard pumps
  • Helical screw pumps
  • Stock pumps
  • Circulating pumps
  • Submersible pumps
  • Water and waste water pumps
  • Oil applications






Notes
The WMG1 can also be used as a multiple seal in tandem or in a back-to-back arrangement. Installation proposals available upon request.

Dimension adaptations for specific conditions, e. g. shaft in inches or special seat dimensions are available upon request.
Item Part no. to DIN 24250 Description

1.1 472 Seal face
1.2 481 Bellows
1.3 484.2 L-ring (spring collar)
1.4 484.1 L-ring (spring collar)
1.5 477 Spring
2 475 Seat
3 412 O-Ring or cup rubber


WMG1 dimension date sheet(mm)



 

Product Tag:
Related categories:
Scroll to Top