Biosafety Pass Box Sterilization and Disinfection Biosafety Dunk Tank

Min.Order: 1
Product origin: Shanghai, China
Infringement complaint: complaintComplaint
US$ 5000

Description
Product Description

Biosafety Dunk Tank
Dunk Tank transfer hatche is a kind of transfer pass box, is through the liquid disinfection way to sterilise the pass box equipment, for different laboratory requirements, can be divided into ordinary level dunk tank and high level biosafety dunk tank, ordinary dunk tank to meet the basic clean requirements can be, biosafety dunk tank is mainly used for high level biosafety laboratories (BSL-3, BSL-4, ABSL-3, ABSL-4), with the requirements of the airtightness room, and with the solution of the logistics channel of the airtightness.
Its function is basically the same as the pass box, only the structure is different from the pass box. When using,open one side door, pull up the net plate, put the objects in liquid, and then cover the panel. It can be taken out on the other side after the soaking time..It also can be achieved the function of double door interlocking.
 

Product characteristics of biosafety dunk tank
1) The plate buried depth of liquid not less than 10cm;
2) With low liquid level alarm function;
3) The transfer method of the dunk tank is manual mode, built-in cover and hook, to ensure that the items can be fully immersed in the liquid, as far as possible to avoid the operator's limbs contact with the disinfection liquid, the box is equipped with both sides of the transfer of the control board, both sides can be operated;
4)  Items to the bottom of the box is forced disinfection, disinfection time can be set;
5) Mechanical compression airtight doors are installed on both sides of the dunk tank;
6) When the sealing performance of the box meets the pressure of 1000Pa, the leakage rate within 1 hour shall not exceed 25%; The pressure bearing capacity shall not be less than 2000Pa;
7) The height of the dunk tank installation is based on actual measurements at the project site and should be conducive to the discharge of disinfectant.

 
Interlocking control system for biosafety dunk tank
For rooms or biological laboratories designed with multiple entry points or interconnections, biosafety pass boxs need to be equipped with an intelligent interlocking system to prevent sudden positive pressure drops and air inflow due to personnel inadvertently opening too many doors at once. When one of the interlocked doors is opened, all other interconnected door locks will activate and prevent personnel from opening any other doors. This feature can prove to be very effective in preventing cross-contamination in multiple biological laboratories with different cleanliness levels.
 

 

Product Parameters
 ModelBS-02-DT-1
Installation method flush with wall
Airtight waySealing strip compression barrier
Control methodSiemens PLC
Communication methodRS232 RS485 TCP/IP
Compressive strength1500Pa
Corrosion resistancedisinfectant
working environment-30ºC+50ºC
way of opening the doorphysical button
lock methodElectromagnetic lock interlock
Cabinet material304/316
Liner material304/316
Sealing strip materialSilicone Rubber
power supply220w 50Hz
net weight150KG
Windowstempered glass
Handle¢15mm crank handle
visual indicationRed closed state, green pass
BMS systemAccessible
Test ReportThird-party national inspection center verification
file system3Q file
Customized serviceYes
After-sales serviceYes
install serviceAdditional quotations are required for different regions and countries
Company Profile

Certificate

 

Packaging & Shipping

Product Tag:
Related categories:
Scroll to Top