Complaint
| Specifications Of Press Line T63 | |
| PRESS | |
| Press capacity | 63 tons |
| Installed power | 12KW |
| Stroke | 240 mm fix |
| Electronic PLC | Mitsubishi |
| Main motor | Siemens |
| Low voltage electrical | Schne-ider |
| Adjustable speed | From 35 to 68 strokes per minute |
| Number of solenoid value with adjustable pressure | 12 |
| Foil feeding | Electronically controlled with servo motor |
| Feeder level adjustable | Electric |
| Feeder level from the bed plate | from 150 to 300 mm |
| Bed plate dimensions | 1100 × 900 mm |
| Ram face dimensions | 480 × 360 mm |
| Maximum mould height with ram DOWN adjustable UP | 420 mm |
| HOLE DIMENSIONS SIDE BLOCK BOTTOM SURFACE | Φ18 |
| SIZE OF CENTERING HOLE (DIAMETER x DEPTH | Φ50 |
| RAM adjustment | 80 mm |
| Maximum mould dimensions | 1100×900 mm |
| Height from the floor to mould side | 810 mm |
DECOILER | |
Maximum width of foil passage | 950 mm |
Outer diameter for aluminium coil | 1000 mm |
Width of the coil | From 180 to 950mm |
Coil weight | 1000 Kg Max |
Coil lifting system | Fixed support |
Installed power | 4.0 KW |
Main motor | Siemens |
Electronic PLC | Mitsubishi |
Low voltage electrical | Schne-ider |
Pneumatic Part | SMC |
Unwinding control | Electronic inverter controlled speed |
Braking system inner diameter for aluminium foil | Electo-magnetic braking system electronically controlled |
Inner diameter for aluminium coil | 3inch or 6inch Additional expansion shafts or shafts with different diameter are available on request. |
Coil core clamping | Expanding removable shaft with safety chucks. |
Embossing Device | On customer request |
STACKER | |
Main conveyor belt height | Adjustable by screw: 1186 mm for Press T80 |
Main conveyor belt width | As per samples |
Containers' stack maximum height | 400 mm |
Collecting lifts | Double speed: normal & fast for the lifting-up |
Electronic PLC | Mitsubishi |
Main motor | Siemens |
Low voltage electrical | Schne-ider |
Ways number | 1-2-3-4 (on request) |
Air flow in m3 | 3000 m3/h |
Installed power | 2 KW |
SCRAP COLLECTION SYSTEM | |
Scrap Baler Capacity | 30 tons |
Power consumption | 5.5 KW |
Main motor | Siemens |
Low voltage electrical | Schne-ider |
Aluminium block size | 400 × 400 × 400 mm |
Total Line Landscape | 6.5*6*3.56 meters (L*W*H) |
