General
ADRV-08 digital timer is designed to be use wherever time dependent control is required.
Usage and Working Principle
Display: Displayed here while setting the time and counting down the set time. If the operating time is set in minutes, the
rightmost point of the display flashes while the device is counting the time. t Knob: To set the working time value, move the knob
to the desired value. When setting the time, the set time is displayed on the screen. (If the time is changed while the device is
counting time, the device continues to count the new time set.) x Knob: To set the time range, move the"x" knob to the desired
value.The right side is reserved x Knob: To set the time range move the"x" knob to the desired value.9.9 sec., 99 sec., 9.9 min.,
99 min., 9.9 hors., 99 hours 6 different time periods can be set. When the time range is set while the device is powered, the
device must be de-energized and re-energized in order for the adjusted time range to be valid.
Maintenance
Switch off the device and release from connections. Clean the trunk of device with a swab. Don't use any conductor or chemical
might damage the device. Make sure device works after cleaning
Warnings
Please use the device according to the manual. Don't use the device in wet. Include a switch and circuit breaker in the assembly.
Put the switch and circuit breaker nearby the device, operator can reach easily. Mark the switch and circuit breaker as releasing
connection for device.
Technical Parameters:
Type | ADRV-08 | ADRV-10 |
Operating Voltage | 150V-260VAC 24V DC,or110VAC 24V DC | 110V or 230VAC(A1-A2) or 24V AC/DC(A2-A3) |
Function | ON Delay | ON Delay or OFF Delay |
Operating Frequency | 50/60Hz | |
Operating Power | <4VA | <6VA |
Ambient Conditions:Humiditv | -20°C.....+55°C | |
Time | 9.9(sec),99(sec),9.9(min),99(min),9.9(hr),99(hours) | 0.1(sec)~99(min) |
Display | 1x2 digit,on led and out(RLY)led | |
Output contact | 5A/250V AC | |
Mounting | Assembld on the din rail | |
Operating Altitude | <2000m |
Q1. What's the payment term?