Nuzhuo New Product High quality/High cost performance Purity 95%-99.999% Nitrogen Generator

Min.Order: 1
Product origin: Hangzhou, Zhejiang, China
Infringement complaint: complaintComplaint
US$ 800 ~ 1500

Description
NUZHUO New Product High Quality Purity 95%-99.999% Nitrogen Generator
Main Features
1. Specific pressure protection measure of molecular sieve,molecular sieve is difficult of pulverization,long sieve life.
2. Low energy consumption,the product of high nitrogen purity.

3..Reasonable internal componets,air distribution uniformity,reduce air high-speed impact.
4.The whole equipment of high degree of automation
5.Multifunctional monitoring system,realize gas,purity,pressure LCD online display,equipment failure warning,maintenance tips,full;y grasp,equipment running states,
6.can ben fully integrated skid mounted design,easy installation and rapid debugging,
7.Optional oxgen flow,remote monitoring system etc,
Product Description

 

Product Name
PSA Nitrogen Generator 
Model No.
NZN; NZN97; NZN99; NZN39; NZN49; NZN59
Nitrogen Production
5~3000Nm3/h
Nitrogen Purity
P5~99.9995%
Nitrogen Pressure
0~0.8Mpa (0.8~6.0MPa alternative)
Dew Point
≤-45 degree C ( Normal Pressure)
 

Specification
Output (Nm3/h)
Effective gas consumption ( Nm3/min ) 
Air cleaning system
Inlet/outlet caliber(mm)
NZN59-5
5
0.78
KJ-1
DN25
DN15
NZN59-10
10
1.75
KJ-2
DN25
DN15
NZN59-20
20
3.55
KJ-6
DN40
DN15
NZN59-30
30
5.25
KJ-6
DN40
DN25
NZN59-40
40
7.0
KJ-10
DN50
DN25
NZN59-50
50
8.7
KJ-10
DN50
DN25
NZN59-60
60
10.5
KJ-12
DN50
DN32
NZN59-80
80
13.75
KJ-20
DN65
DN40
NZN59-100
100
16.64
KJ-20
DN65
DN40
NZN59-150
150
24.91
KJ-30
DN80
DN40
NZN59-200
200
33.37
KJ-40
DN100
DN50
NZN59-300
300
49.82
KJ-60
DN125
DN50
Working Principle

 

 

Following the principle of pressure swing adsorption, high-quality carbon molecular sieve is used as the adsorbent. Under certain pressure, due to the dynamic effect, the diffusion rate of oxygen and nitrogen on the carbon molecular sieve is different. The oxygen molecules are adsorbed by the carbon molecular sieve in large quantities. Nitrogen molecules are enriched in the gas phase to achieve oxygen and nitrogen separation. Since the adsorption capacity of carbon molecular sieve for oxygen varies significantly with pressure, reducing the pressure can adsorb the oxygen molecules adsorbed by the carbon molecular sieve, so that the carbon molecular sieve can be regenerated and reused. Two adsorption tower processes are adopted, one is for adsorption and nitrogen production, and the other is for desorption and regeneration, alternating cycles and continuous production of high-quality nitrogen.
No
MAIN PART
FUNCTION
1
Air compressor 
 Air is used as raw material to collect & compress air to 8 bar, (Screw type)
 
 
2
 
Refrigerated dryer
The standard configuration removes moisture and impurities in the air, so that the air dew point reaches -20°C (the intermediate configuration uses an adsorption dryer, and the dew point reaches -40°C; the advanced configuration uses a combined dryer, and the dew point reaches- 60ºC).
3
Precision Filter
A/T/C three-stage filter to remove oil, dust and impurities.
4
Air buffer tank
Store pure and dry air for subsequent adsorption and separation of oxygen and nitrogen as raw material storage.
5
Adsorption tower
A&B adsorption tower can work alternately, regenerating adsorption, filling sodium molecular sieve to filter out oxygen molecules.
6
Analyzer
Real-time monitoring and analysis of oxygen & nitrogen purity, indicating that the equipment is working normally and alarming.
7
Valves & pipelines
Intelligent control valves realize automatic operation of equipment, PLC control, SUS304 pipelines.
8
Gas Buffer Tank
Store oxygen & nitrogen with qualified purity, which can be directly piped or used for bottle filling.
9
Pressure regulator
Adjust and temperature the outlet pressure of oxygen & nitrogen (3-6 Bar).
10
Dust filter
Remove the dust brought by molecular sieve in oxygen & nitrogen
11
Check valve
Prevent oxygen & nitrogen back flow
12
Gas Booster
Pressurize the oxygen&nitrogen to the filling pressure, generally 150bar or 200bar.
13
Filling Manifold
Split high-pressure oxygen & nitrogen into each gas cylinder
 
Technical features

 

* Intelligent soft cycle switching, purity and flow can be adjusted within a certain range.
* All relevant system components are reasonably configured and the failure rate is low.
* Reasonable internal components, uniform airflow distribution, reduce the impact of high-speedairflow.
* Perfect process design, optimal use effect.
* Unique molecular sieve protection measures extend the service life of Zeolite molecular sieve(carbon molecular sieve).
* The intelligent interlocking unqualified oxygen (nitrogen) emptying device guarantees the oxygen (nitrogen) quality of the product.
* Optional oxygen (nitrogen) device flow, automatic purity adjustment system, remote control system
* The whole machine leaves the factory, and there is no basic device indoors.
* Convenient installation of matching pipes.
* The operation is simple and stable, and full automation, which can realize unmanned operation.

 
Detailed Photos
Q1: Are you a trading company or manufacturer? 
A:We are a manufacturer.
 
Q2: What is your term of payment? 
 
A: 30%T/T in advance and balance before shipment. 
 
Q3: How long is your delivery time?
 
A: Depending on what type of machine you are purchased, normally 5 to 10 working days.
 
Q4: What is your product quality assurance policy? 
 
A:We offer a warranty period of 1 year, free lifetime technology support.
 
Q5: Do you offer OEM/ODM service?
 
A: Yes.
 
Q6: Does your product used or new? RTS product or customized product? 
 
A:Our machine is new unit, and following your specific require to design and make it.
 
 
 
 
 
 
Product Tag:
Related categories:
Scroll to Top