Complaint
| Model | OGZ30 | OGQ30 | OGZ30 | OGQ30 | |
| Supply voltage | AC220V 50/60Hz or AC24V 50/60Hz 50/60HZ AC220/AC24V 50/60HZ | Power consumption | 6W or 9W(Only when the valve is open and closed) <9W | ||
| switching time | ≤15s | Protection level | IP54 | ||
| Operation mode | Angular travel 360 ° switch, unidirectional rotation. | Angle travel 90 ° switch, forward and reverse rotation. | Control mode | Three line two control or Three wire one control | |
| Torque | 4Nm 7Nm | 7Nm | |||
| Medium temperature | 2ºC~95ºC(Iiquidity) | Closing differential pressure | 0.6MPa(Two way) | ||
| Work environment | 2ºC~60ºC | Actuator size | 85x63x89mm | ||
| Lead length | 0.5m(Customizable) | Valve body specifications | DN15/DN20/DN25/DN32(Two way) | ||
| Fault phenomenon | Cause analysis | Exclusion method | Remarks column |
| Continuous operation without stopping. | The brown and blue wires are connected to the power supply, while the two color wires are not connected to power. | Rewire according to the wiring diagram. | Rewiring does not respond, motor damage, self responsibility for consequences. |
| Does not operate after power on. | The wires are not connected in place, resulting in poor contact. | Check the power supply status of the power supply port and connect the wires in place. | |
| Incorrect connection to power and voltage usage. | Connect the correct power supply and voltage. | If the power connection is incorrect and the product is burned, the consequences will be borne by oneself. |
| Product model | Specifications | Size | ||||
| DN (mm) | Internal thread(G) | Length(L) (mm) | Height(H) (mm) | Width(A) (mm) | ||
| Two way | OG30-215 | 15 | 1/2" | 50 | 121 | 23 |
| OG30-220 | 20 | 3/4" | 59 | 128 | 33 | |
| OG30-225 | 25 | 1" | 66 | 133 | 41 | |
| OG30-232 | 32 | 1 1/4" | 72 | 143 | 48 | |
