Gas Burner for Stenter Frames Dryer

Min.Order: 4

Product origin: Yancheng, Jiangsu, China

Infringement complaint:

Complaint

US$ 2600 ~ 3200

Description

TB series burner is a nozzle mixing gas firing burner, suitable for those direct firing ovens and dryers, the burner offers a simple and versatile solution for any installations have high turndown requirement, proved performance in textile stenter, printing dryer.

A motorized gas air control valve controls the heat output of the burner over the full operation range. The gas flow through the nozzle and then along the inside of the burner cone where combustion air is progressively and tangentially mixed with fuel gas. This result in short vary stable, and clean combustion

Firing capacity: 10-250Kw
Max process temperature: 320°C
Voltage: 220-240VAC/50Hz
Fuel: Nature gas, propane
Gas pressure :5-100Kpa
Flame size: 0.8m(L)×0.3m(D)

	TB-200	TB-300	TB-600	TB-800	TB-1000
Max Heat(Kw)	250	325	650	860	1100
Min Heat(Kw)	6.25	9	18	22	27
Turndown Ratio	40:1	36:1	36:1	40:1	40:1
Q_gas Max(Nm³/h)	25.2	33	65	87	111
Q_gas Min(Nm³/h)	0.63	0.9	1.8	2	2.7
Q_air Max(Nm³/h)	277	360	800	1200	1200
n Factor @ Max heat	1.1	1.1	1.3	1.4	1.1
P_gas @max heat(mbar)	7.6	6.9	7.4	6.8	7.4
Comb Fan Motor (Kw)	0.25	0.25	1.1	1.1	1.1
Flame Length (mm)	900	1000	1100	1600	1800