Sell Well Black Sic Foundry Silicon Carbide Powder Grinding and Polishing Powder

Min.Order: 1
Product origin: Jinan, Shandong, China
Infringement complaint: complaintComplaint
US$ 1600 ~ 1900

Description

 

Product Description

 


Silicon Carbide Grit
Junda Silicon Carbide Grit is the hardest blasting media available. This high-quality product is manufactured to a blocky, angular grain shape. This media will break down continuously resulting in sharp, cutting edges. The hardness of Silicon Carbide Grit allows for shorter blast times relative to softer medias.
Silicon carbide has a very high hardness, with a Mohs hardness of 9.5, second only to the world's hardest diamond (10). It has excellent thermal conductivity, is a semiconductor, and can resist oxidation at high temperatures.
 

At present, it is mainly used in the following fields:

1>Electronic products, ceramic materials, semiconductors

2>Abrasive tools, grinding, polishing

3>Refractory materials

4>Metallurgy, casting, Deoxidizer

 
Product Parameters
 
Silicon Carbide Grit Specifications
Mesh Size
Average Particle Size(the smaller the mesh number, the coarser the grit)
8Mesh
45% 8 mesh (2.3 mm) or larger
10Mesh
45% 10 mesh (2.0 mm) or larger
12Mesh
45% 12 mesh (1.7 mm) or larger
14Mesh
45% 14 mesh (1.4 mm) or larger
16Mesh
45% 16 mesh (1.2 mm) or larger
20Mesh
70% 20 mesh (0.85 mm) or larger
22Mesh
45% 20 mesh (0.85 mm) or larger
24Mesh
45% 25 mesh (0.7 mm) or larger
30Mesh
45% 30 mesh (0.56 mm) or larger
36Mesh
45% 35 mesh (0.48 mm) or larger
40Mesh
45% 40 mesh (0.42 mm) or larger
46Mesh
40% 45 mesh (0.35 mm) or larger
54Mesh
40% 50 mesh (0.33 mm) or larger
60Mesh
40% 60 mesh (0.25 mm) or larger
70Mesh
40% 70 mesh (0.21 mm) or larger
80Mesh
40% 80 mesh (0.17 mm) or larger
90Mesh
40% 100 mesh (0.15 mm) or larger
100Mesh
40% 120 mesh (0.12 mm) or larger
120Mesh
40% 140 mesh (0.10 mm) or larger
150Mesh
40% 200 mesh (0.08 mm) or larger
180Mesh
40% 230 mesh (0.06 mm) or larger
220Mesh
40% 270 mesh (0.046 mm) or larger
240Mesh
38% 325 mesh (0.037 mm) or larger
280Mesh
Median: 33.0-36.0 micron
320Mesh
Median: 26.3-29.2 micron
360Mesh
Median: 20.1-23.1 micron
400Mesh
Median: 15.5-17.5 micron
500Mesh
Median: 11.3-13.3 micron
600Mesh
Median: 8.0-10.0 micron
800Mesh
Median: 5.3-7.3 micron
1000Mesh
Median: 3.7-5.3 micron
1200Mesh
Median: 2.6-3.6 micronc
Product Feature

Due to its stable chemical properties, high thermal conductivity, low thermal expansion coefficient, and good wear resistance,silicon carbide has many other uses besides being used as abrasives. For example, silicon carbide powder is applied to the impeller or cylinder of a water turbine by a special process. The inner wall can improve its wear resistance and prolong its service life by 1 to 2 times; the high-grade refractory material made of it has heat shock resistance, small size, light weight, high strength and good energy-saving effect. Low-grade silicon carbide (containing about 85% of SiC) is an excellent deoxidizer.It can speed up the steelmaking speed, and facilitate the control of chemical composition and improve the quality of steel. In addition, silicon carbide is also widely used to make silicon carbide rods for electric heating elements.

Silicon carbide (commonly referred to by its chemical formulation of SiC) is a chemical compound comprised of silicon and carbon that results in extremely hard (9 on the Mohs scale) iridescent crystals. CARBOREX® grains and powders offer superior properties such as low density, low thermal expansion, oxidation resistance, excellent chemical resistance, high thermal shock resistance, high wear and hardness resistance, high strength, high temperature resistance and high temperature strength.
 
Company Profile


Exhibition

 

Certifications

 

Buyer's praise

1. Are you a factory or trading company?
Jinan Junda Industrial Technology Co.,Ltd, established in 2005, is specialized in the development,manufacture, marketing and service-supplying of abrasives and sand blasting equipment, spare parts & protective tools. With its headquarter in Jinan city, Shandong province, Junda is becoming the leading enterprise in the field of metal surface finishing. 

2. Can you provide ODM or OEM service? 
We have complete lines for design and produce,we do many OEM and ODM service for our customers. 

3. Can you provide samples? 
We can provide paid samples. 

4. What is the lead time for regular orders?
It depends on the order quantity and the season you place the order. The lead time is about 5-15 days. 

5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,FCA; Accepted Payment Currency:USD,EUR,JPY; Accepted Payment Type: T/T,L/C,Cash; Language Spoken:English,Chinese

More details, please contact 
 

Product Tag:
Related categories:
Scroll to Top