Complaint
| - Available sizes: 1020X1220/1020X2040/1220x2440mm | - Thickness: From 0.5mm |
| - Colour: Light green / Natural color | - Surfaces: Shining |
| - On demand we can deliver strips or finished components. | |
| - Very low hygrometric susceptibility | - Small losses at high frequency |
| - Excellent mechanical properties when cold | - Good dielectric properties |
| - Workable while cold up to 3mm. thick | - |
| Thickness (d) | Length of straight edge | |
| 1000 | 500 | |
| 3 < d ≤ 6 6 < d ≤ 8 8 < d | 10 8 6 | 2.5 2.0 1.5 |
| Nominal thickness (d) | Nominal width | |||||
| 3< d ≤50 | 50< d ≤100 | 100< d ≤160 | 160< d ≤300 | 300< d ≤500 | 500< d ≤600 | |
| 0.4 0.5 0.6 | 0.5 0.5 0.5 | 0.5 0.5 0.5 | 0.5 0.5 0.5 | 0.6 0.6 0.6 | 1.0 1.0 1.0 | 1.5 1.5 1.5 |
| 0.8 1.0 1.2 | 0.5 0.5 0.5 | 0.5 0.5 0.5 | 0.5 0.5 0.5 | 0.6 0.6 1.0 | 1.0 1.0 1.2 | 1.0 1.0 1.2 |
| 1.5 2.0 2.5 | 0.5 0.5 0.5 | 0.5 0.5 1.0 | 0.5 0.5 1.0 | 1.0 1.0 1.5 | 1.2 1.2 2.0 | 1.2 1.5 2.5 |
| 3.0 4.0 5.0 | 0.5 0.5 0.5 | 1.0 2.0 2.0 | 1.0 2.0 2.0 | 1.5 3.0 3.0 | 2.0 4.0 4.0 | 2.5 5.0 5.0 |
| NOTE: Unilateral,all-negative tolerance are normally applied to the width of cut strips,and are given in the above table,other tolerance may be agreed upon between purchase and supplier. | ||||||
| Normal Thickness | Tolerance | Normal Thickness | Tolerance | |
| 0.4 0.5 0.6 0.8 1.0 1.2 1.5 2.0 2.5 3.0 4.0 5.0 6.0 | 0.10 0.12 0.13 0.16 0.18 0.20 0.24 0.28 0.33 0.37 0.45 0.52 0.60 | 8.0 10 12 14 16 20 25 30 35 40 45 50 60 | 0.72 0.82 0.94 1.02 1.12 1.30 1.50 1.70 1.95 2.10 2.30 2.45 2.50 | |
| If need un-normal thickness, the tolerance will be confirmed by the seller and the buyer each other before placing the order . | ||||
| ITEMS | CONDITIONS | TEST METHOD | VALUES |
| Thermic endurance | in transformer oil for 4 hours | IEC 60893-2-7.1 | 130 OC ( B) |
| Martin's Temp. ( perpendicular ) | -- | -- | 200 OC min. |
| Specific weight | 20 OC | IEC 60893-2 | 1.70 - 1.9 g/cm3 |
| Water absorption | 24 h | IEC 60893-2-8.2 | 1.2 mm - 18 mg |
| Flexural strength ( perpendicular ) | 23 ± 2 OC | IEC 60893-2-5.1 | 340 MPa min. |
| Charpy impact strength ( parallel ) | 23 ± 2 OC | IEC 60893-2-5.4.2 | 33 KJ/m2 min. |
| Izod impact strength ( parallel ) | 23 ± 2 OC | IEC 60893-2-5.4.3 | 34 KJ/m2 min. |
| Electric strength ( perpendicular ) | in transformer oil at 90 ± 2 OC | IEC 60893-2-6.1 | ≤3.0 mm 10.2KV/mm min. |
| Break down voltage ( parallel ) | in transformer oil at 90 ± 2 OC | IEC 60893-2-6.1 | > 3.0mm 35 KV min. |
| Insulating resistances After immersion in water | 23 ± 2 OC | IEC 60893-2-6.3 | 5.0 X 108W min. |
| Flammability | UL94 | IEC 60893-2-7.2 | -- |
