Complaint
Decoloring Agent GR-F112
This product is a quaternary cationic polymer which is specialized product to treat effluent for color removal, flocculating and COD decreasing.
Specificationa:
| Specifications: | BWD-01 Water Decoloring Agent |
| Appearance: | Colorless to yellowish translucid liquid |
| Solid Content: | ≥50% |
| Specific Gravity at 20°C: | 1.1-1.3 |
| PH Value (30% Solution): | 3-6 |
| Storage Temperature: | 10-30 (oC) |
| Viscosity(25°C,cps): | 30-300 |
| Solubility: | Soluble With Water at Any Rate |
1, It is mainly used for color removal treatment for high-colority wastewater from dyestuffs plants. It is suitable to treat wastewater with actived, acidic and disperse dyestuffs.
2, It can also be used to treat wastewater from textile industry and dye houses, pigment industry, printing ink industry and paper industry.
3, It also can be used in the production process of paper&plup as rtention agent.
Applicatio methods:
1, Dilutes with 10 - 40 times water and then dosed into the waste water Directly, after being mixed for several minutes, it can be precipitated or Air-floated to become clear water
2, pH index of the waste water should be adjusted to 7 - 10 for better Result
3 If colority and COD are relatively high, it can be used with the help of Polyaluminum chloride to reduce treatment cost, whether polyaluminum Chloride is used before or afterwards depends on the flocculation test And the treatment process
1.Mutil effect decoloring agent for decolorization, flocculation, remove COD etc.
2.Be used for decolorization treatment of high chormaticity wastewater suac as reactive dyes, acidic dyes and disperse dyes in textile and printing and dyeing industry.
3.Be used for industrial wastewater treatment suac as pigments, inks and papermaking.
4.Be used as papermaking rein forcing agent, sizing agent and chargr neutralizer.
Work PH:7-10
Usage: Direct use after 10-40 times dilution with water, dosage be adjusted according to local conditions,
Temp.:20-40ºC
EXHIBITION SHOW
