Table 1: The Specification of Plastic Tri-Pack | ||||||
Item | Size (mm) | Surface Area (m2/m3) | Voidage | Bulk Number (n/m3) | Bulk Density (kg/m3) | Dry Packing Factor (m-1) |
PTPR-01 | 25 | 85 | 90% | 81200 | 81 | 28 |
PTPR-02 | 32 | 70 | 92% | 25000 | 70 | 25 |
PTPR-03 | 50 | 48 | 93% | 11500 | 62 | 16 |
PTPR-04 | 95 | 38 | 95% | 1800 | 45 | 12 |
Table 2: Physical & Chemical Properties of Different Materials of Plastic Tri-Pack | ||||||
Material/Performance | Density (After Injection Molding) (g/cm3) | Operation Temperature (°C) | Chemical Corrosion Resistance | Compression Strength (MPa) | ||
PE | 0.98 | 90 | good | >6.0 | ||
PP | 0.96 | >100 | good | >6.0 | ||
RPP | 1.2 | >120 | good | >6.0 | ||
PVC | 1.7 | >60 | good | >6.0 | ||
CPVC | 1.8 | >90 | good | >6.0 | ||
PVDF | 1.8 | >150 | good | >6.0 |