Clean Box Oven for Aging of Electronic Components

Min.Order: 1

Product origin: Hefei, Anhui, China

Infringement complaint:

Complaint

US$ 15000 ~ 18000

Description

HXF018-02 Clean Box Oven

Main Application:
This furnace is designed for aging of electronic components.
Specification

Max Temperature: 220ºC. Working Temperature: 85~200ºC.
Heating Element: Nickel chrome alloy heating wire.
Heating Power:4.4Kw.
Insulation Power: about 2Kw.
Load Plate Layer:8 layers.
Temperature Control Point:1 point.
Temperature Test Point:1 Point.
Thermocouple: K Type.
The Temperature of Furnace Surface: <35ºC.
Control Precision: ±1ºC(under standard process profile)
Temperature Uniformity: ≤±3ºC(Flat temperature 200ºC)
Chamber Material: Mirror stainless steel.
The Effective Dimension of the Chamber: 500mm×600mm×600mm(W×D×H).
Outside Installation Dimension: 650mm×1150mm×900mm(W×H×D)
Chamber Atmosphere: Air.
Exhaust System: there is an exhaust stack at the rear of the furnace for exhaust the waste gas.
Cooling: free cooling.
Alarm Protection: over temp, over load and other audible and visual alarm protection
Safety Heating Rate: ≤5ºC/min.
Control Meter: use imported intelligent temperature controller, PID control, parameter auto tuning. With the alarm protective functions of over temp, thermocouple failure etc.
Control Mode:Solid State relay zero cross trigger mode.
Over Temperature Alarm: when over temperature occurred in some zones, over temperature alarm system in corresponding zones immediately send audible and visual alarm signal and meanwhile the heating of this zone is cut off, the buzzer sounds alarm.
Equipment Appearance: outside surface spraying, off white color.