Description
DescriptionsThe pressure spray dryer uses the pressure atomizer to atomize the solution or slurry materials into fine droplets with the help of the pressure of the pressure pump, so as to significantly increase the surface area; Fast drying through full heat exchange with hot air(tens of seconds to tens of seconds), so as to obtain powder or fine particle products.
FeaturesFast drying speed, especially suitable for heat sensitive materials:
The product is powder granule with uniform particle size, good fluidity and solubility;
It can be used in a wide range, such as hot air drying, granulation, cooling granulation, etc;
It can be equipped with a fine powder return and wet agglomeration system to properly adjust the requirements for material particle size:
Simple and stable operation, convenient control, easy to realize automatic operation, and the product particle size, bulk density and moisture can be adjusted within a certain range.
ApplicationsFood, medicine, chemical industry, dyeing, ceramics, biochemistry, pesticides, plastics and other applicable liquids with corresponding fluidity.
Structure DiagramTechnical Specification Model | Unit | 50 | 100 | 150 | 200 | 300 | 500 | 4600×22500 |
Evaporated Moisture | kg/h | 50 | 100 | 150 | 200 | 300 | 500 | 4600×22500 |
Overall Size(ø*H) | mm | 1600×8900 | 2000×11500 | 2400×13500 | 2800×14800 | 3200×15400 | 3800×18800 | 4600×22500 |
Pressure of Pump | MPa | 0.5-8 |
Power | KW | 8.5 | 14 | 22 | 24 | 30 | 82 | 30 |
Temperature of Inlet Air | ºC | 300-350 |
Recovery of Raw Material | % | ≥97 |
EHeating by Electricity | KW | 75 | 120 | 150 | When the temperature is lower 200ºC,the specificatione should be calculated according to specfic stiuation. |
Electricity+Steam | MPa+KW | 0.5+54 | 0.6+90 | 0.6+108 |
Hot Blast Stove | Kcal/h | 100000 | 150000 | 200000 | 300000 | 400000 | 500000 | 1200000 |