20W N Female IP65 Fiber Optic Signal Booster for Mobile Phone High Isolation Full Duplex

Min.Order: 10

Product origin: Shenzhen, Guangdong, China

Infringement complaint:

Complaint

US$ 500 ~ 1500

Description

20W N- Female IP65 Fiber Optic Signal Booster For Mobile Phone High Isolation Full Duplex

1. Introduction:
RF WCDMA ICS Repeater 20W N Female IP65 Mobile Signal Booster Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low-power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

2.Features:
1. High isolation full duplex design, Wave Division Multiplexing design, easy to install.

2. Low noise figure, high receive sensitivity.

3. With ALC and MLC function to ensure stable output power and easy installation and commissioning.

4. Scientific and perfect circuit design, and adopting advanced amplifier device, ensure the repeater station
equipment low power consumption, environmental protection and energy saving.

5. Modular structure design, according to need, easily to upgrade the system by increasing the module,
expand the business.

6. High Q cavity filter and SAW surface acoustic wave filter, high out of band rejection.

7. Adopt the world's most advanced high linearity, low intermodulation LDMOS power amplifier.

8. Perfect remote and local network monitoring function.

9. Waterproof design work for all weather indoor and outdoor.

Technical Specifications:

Items		Testing Condition	Specification
			Uplink	Downlink
Working Frequency(MHz)		Nominal Frequency	351-356 Any band customized	361-366 Any band customized
Gain(dB)		Nominal Output Power-5dB	45±3 t0 65±3Customize
Output Power (dBm)		CDMA modulating signal	-10-0 Customize	33-48 Customize
ALC (dBm)		Input Signal add 20dB	Po≤±1
Noise Figure (dB)		Working in-band(Max. Gain)	≤5
Ripple in-band (dB)		Nominal Output Power -5dB	≤3
Frequency Tolerance (ppm)		Nominal Output Power	≤0.05
Time Delay (us)		Working in-band	≤5
Peak Phase Error(°)		Working in-band	≤20
RMS Phase Error (°)		Working in-band	≤5
Gain Adjustment Range(dB)		Nominal Output Power -5dB	≥30/1dB step
Inter-modulation Attenuation (dBc)		Working in-band	≤-45
Spurious Emission(dBm)	9kHz-1GHz	BW:30KHz	≤-36
	1GHz-12.75GHz	BW:30KHz	≤-30
VSWR		BS/MS Port	≤1.5
I/O Port		N-type Female
Impedance		50ohm
Relative Humidity		Max. 95%
MTBF		Min. 100000 hours
Optical fiber connector		FC/PC
Wavelength		1310/1550 nm
Power Supply		DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)
Remote Monitoring Function		Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power
Remote Control Module		RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

Application:
350MHZ Digital Trunking Communication Fiber Optic Repeater is applied to security system, armed system, fire protection system, analog trunking communication system or TETRA digital trunking communication system signal coverage extension.

Outdoor: Airports, Golf Courses, Tourism Regions, Villages, Highway, Tunnels, Mining Districts etc.
Indoor: Hotels, Exhibition Centers, Shopping Malls, Gymnasium, Basements, Offices, Factory,Hospital,Entertainment, Packing Lots etc.

Q: Can offer the free sample?
A: Yes, we offer 1 free sample (But customer pay the shipping charge), or more samples need to pay on your account, the sample cost will be refunded once order confirmed.

Q: How do normally take payments?
A: T/T, Paypal, we also accept West Union.

Q: If goods are not the same as described in the contract pictures or samples provided?
A: Contact us within 48 hours: Return in exchange for replacement; Return in exchange for full refund.

Forward

Related products