High quality/High cost performance Alumina Silica Gel for Natual Gas Drying Silica Gel Desiccant

Min.Order: 1,000
Product origin: Dongying, Shandong, China
Infringement complaint: complaintComplaint
US$ 2

Description

Product Description

 

Properties

The appearance of aluminum silica gel is silightly yellow or white transparent with chemical molecular formula mSiO2 • nAl2O3.xH2O. Stable chemical propertities. Non combustion, insoluble in any solvent except strong base and hydrofluoric acid. Compared with fine porous silica gel, the adsorption capacity of low humidity is similar (such as RH = 10%, RH = 20%), but theadsorption capacity of high humidity (such as RH = 80%,   RH = 90%) is 6-10% higher than that of the fine porous silica gel, and the thermal stability (350ºC) is 150 ºC higher than fine porous silica gel. So it is very suitable to be used as the variable temperature adsorption and separation agent.

Application

It is mainly used to separate light hydrocarbon from natural gas, reduce the dew point of hydrocarbon, and produce natural gas and gasline, meanwhile, the natural gas is also dried. If there is water droplet in separation system, it needs about 20% (weight ratio) of water-resistant Si-Al-silica gel as protective layer.
This product can also be used as a common desiccant, catalyst and its carrier, also can be used as PSA, especially suitable for high temperature TSA.
 

Product Parameters

 

Typical ItemsUnitIndicators
25ºC
Adsorption Capacity

% wt
RH=10%   >--6.1
RH=20%   >
--
10
RH=40%   >
--
20
RH=60%   >
--
32
RH=80%   >
--
42.6
   Bulk Density       g/L700-720
   Heating Loss     <%2
Surface Aream2/g680-700
Crushing Strength     >N160
      Moisture        ≤%3.0
      Pore Volume        ml/g0.45-0.5
AL2O3%2-3.5
Spherical particle
qualification rate

%

92.5


Size: 1-3mm, 2-4mm, 2-5mm, 3-5mm

Packaging: Bags of 25kg or 500kg

Notes:

1. Particle size, packaging, moisture and specifications can be customized.   

2. Crushing strength depends on particle size.

 

Detailed Photos

 

 

Packaging & Shipping

 

 

Company Profile

 



Dongying Yiming New Material Co., Ltd. is located in the Delta of Great Yellow River -Dongying, China!


The enterprise was established in 2001. After more than twenty years of development, it has become a high-tech innovative enterprise integrating scientific research, production and trade. The company covers an area of more than 300 mu (50 acres), with total assets of 720 million yuan and more than 300 employees.


The company is mainly engaged in silica gel products, like silica gel desiccant (fine porous silica gel), type B silica gel, discoloration silica gel, variable pressure adsorption silica gel, micro-bead silica gel, column chromatography silica gel, thin layer chromatography silica gel, silica matting agent, etc.


Based on silica gel products, the company extended its development to the catalyst field, producing catalyst products such as melamine catalyst, aniline, o-toluidine catalyst, hydrogenation catalyst, silicon aluminum material, carbon monoxide combustion supporting agent and so on.


Since its establishment, the company has established the highest-in-China quality control standard and strictly implemented all the quality requirements of the standard. In just a few years, Yiming products have occupied most of the domestic market and are sold to developed countries and regions such as Japan, South Korea and the United States.


The rapid development of the company has been recognized by experts and peers at home and abroad. In 2015, Yiming enterprise was invited by National Chemical Standards Committee to participate in the drafting and formulation of national industrial standards for chemical products such as silica gel, micro-sphere silica gel, industrial silica sol and modified copper silica gel. Based on national standard, Yiming set up even higher enterprise standard for all the products.


All the while, Yiming company pays great attention to developing and bringing in advanced management modes and means to improve the enterprise management level, and has successively introduced ISO9001, ISO14000, ERP, ISO18000, ISO / TS16949, OA and other management systems and tools. Effective management mode and strict management means ensure that we can continue to provide users with qualified and stable products and services, and help users create value more conveniently.


Adhering to the development concept of "seeking development with science and technology and survival with quality", Yiming company has successively introduced the most advanced production technology and testing equipment at home and abroad, relying on strong technological innovation to continuously improve product competitiveness. At present, the company has formed a development pattern in which a variety of products coexist. The product quality and scientific and technological strength are at the forefront of the industry, and the products sell well at home and abroad. The company always follows the purpose of "reputation first, service first and quality first", and gives back to the society with professional technical strength, advanced production equipment, strict management system, humanized service standards, ultra-high quality and environment friendly products.


Yiming enterprise, our common future; All-win and Resonance is our eternal belief!
 

Certifications

 



 

FAQ

 

Q1. Can I have a sample order for silica gel dryer products?
A: Yes, we'd like to send samples free of charge by TNT/FEDEX/DHL. Mixed samples are acceptable.

Q2. What about the lead time?
A:It is 3-5 days for sending samples
    It is usually within 15 days to delivery orders for quantity within 100mt, 

Q3. Do you have any MOQ limit for silica gel order?
A: No.But the less the average cost higher.

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 working days to arrive.
     It depands on the distance by sea.7-40days.

Q5. How to process an order for silica gel Desiccant Products?
A:
1).let us know your requirements or application.
2).We quote according to your requirements or our suggestions.
3).customer confirms the samples and pay deposit for order.
4).We arrange the production.

Q6. Is it OK to print my logo on packages?
A: Yes. Please inform us before our production and confirm the design firstly based on our sample.

Q7: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less 
than 0.2%.
Secondly,If it happened,we shall arrange to send new products to you and pay for all your lost.

Any question,kindly contact us please!
Scroll to Top