900Mbps 5g High Power Outdoor Wi-Fi Bridge Support Gateway, Wireless Ap, Repeater, Wisp, Wds Operation Mode

Description:
CPE850Q is an high power industrial 5G outdoor CPE with 5KM PTP/PTMP range. Comply with the next generation 802.11ac Wi-Fi standard, Qualcomm Chipset, combined 900Mbps high speed in 5.8G, equipped Gigabit WAN port, 3 times Ethernet data rate faster than 300Mbps model; It with LED display to show and configure CPE's operation mode, Channel, IP address and Signal Strength, simple to do the Point to Point connection by reset button, no need to access into GUI.

900Mbps Data Rate & Gigabit WAN/LAN Ports 
CPE850Q features 802.11ac Wi-Fi and 2*2 MIMO technology, 900Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high speed internet access and more end users access.

5GHz frequency, more channels, lower latency, higher stability
CPE890DH with full frequency of 5020~6100MHz, more than 200 channels available, it avoid the frequency interference problem, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.

5KM PTP/PTMP Distance  
Designed in two line Power Amplifier on PCB board, the power can be 300mW high power, 15dBi MIMO high gain panel antenna, greatly increase the Wi-Fi range to 5KM distance, then supply the stable Wi-Fi signal for users.

LED Display
CPE850Q with LED display to show AP/Client operation mode, Channels, IP address and RF Power; What's more, it is easy to setup CPE850Q operation mode, IP address, Channels by set switch on product, no need to access into GUI, avoid the complex setup program, simple to check the working status.

Power over Ethernet
CPE850Q has integrated IEEE802.3af 48V PoE, (passive Power over Ethernet is optional), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.

Main Features:

1. Comply with IEEE 802.11ac/a/n, 5GHz,900Mbps Data Rate
2. 1*10/100/1000Mbps WAN Port, 1*10/100/1000Mbps LAN Port
3. 300mW high power, build in 15dBi MIMO panel antenna, stronger signal strength, more wireless coverage
4. Support 48V IEEE 802.3af PoE, passive PoE, 24V is optional 
5. Support SSID broadcasting, Muiti SSID up to 4, then support tag VLAN based on SSID. 
6. Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP, WDS operation mode
7. With function of build in firewall, IP filter, URL filter and MAC filter  
8. Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better application in different environment
9. Support DDNS, VPN pass through, Port forwarding and DMZ host
10. Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security

Pls contact with our sales for more details! 
With professional networking experience, they will be helpful for you!