Air Filter Carbon Steel Stainless Steel and Other Materials

Min.Order: 1

Product origin: Wenzhou, Zhejiang, China

Infringement complaint:

Complaint

US$ 15 ~ 7500

Description

The shell of XQ type air filter adopts steel plate welding structure, and the top of the container is equipped with a float ball. The float ball is composed of a float ball, a float connecting rod, a valve body, a valve core and a seat. The inner cavity is equipped with a filter element to filter impurities.
2. Working principle
When the refined oil enters the degassing filter, the filter screen can remove solid impurities, while the refined oil enters the filter degassing chamber from the inlet end, hits the baffle, will cause pressure loss, and change the direction of liquid flow, liquid upward flow, through the oil drain plate to make the free gas and partial decomposition gas in the oil initially overflow from the oil, the oil continues to rise, through the separator shunt, Make the oil and gas further separated, the gas rises to the top, forming the gas phase space, with the expansion of the gas space, the oil and gas interface drops, drops to a certain height when the float valve device works, discharge the gas, with the gas discharge, the oil and gas interface rises, so that the float valve is closed, so repeated action to achieve the purpose of separation.
Main technical parameters: Material of shell: carbon steel, stainless steel. Filter element: stainless steel. Filtration accuracy: 10~300 mesh. Seal ring: PTFE. Operating temperature: -30~+3500C. Connection type: flange connection, welded, threaded connection. Flange standard: GB, HG, SH, HGJ, ANSL, JIS, etc.
Installation and use
1. When SXQ type degassing filter is used in the pipeline, install it according to the order of filter degassing device - liquid flowmeter - valve, and pay attention to the inlet and outlet direction of the liquid should be in line with the arrow direction.
2. Pipe residue and debris must be thoroughly cleaned before installation.
Before the filter sterilizer, the straight pipe section should be installed as long as possible, so that the liquid can enter the filter sterilizer relatively smoothly.
3, in the case of gas exhaust outlet exposed to the atmosphere, in order to prevent the exhaust gas pollution of the air and accidents should be installed gas collection tank.
4. A pressure gauge should be installed on the inlet and outlet side of the filter sterilizer, and the filter should be cleaned when the pressure loss is greater than 0.07MPa.
5, the metering system in the beginning of use, should slowly open the valve, so that the measured liquid slowly into the filter degasser, to prevent the liquid self-floating ball valve exhaust port overflow.

Working principle

When the refined oil flows into from the import, through the filter installed in the cylinder, the solid impurities are removed, and the liquid passes through the filter component, the liquid flow direction is changed, so that the free gas and partially dissolved gas in the oil product fully run out, the gas rises to the top of the separator, forming a gas space, and the oil-gas interface appears. As the gas increases the pressure increases the volume increases, the oil and gas interface decreases, the float device moves to a certain extent, opens the gas valve to remove the gas, the oil and gas interface rises, the gas space shrinks the float device closes the gas valve, so that the medium flowing through the degassing filter reaches the purpose of separating oil, gas and solid.

Design pressure

Model number	LTXG-40	LTXG-50	LTXG-80	LTXG-100	LTXG-150	LTXG-200	LTXG-250
Nominal diameter D(mm)	40	50	80	100	150	200	250
Flow range m³/h	3.2 ~ 16	5 ~ 25	12 ~ 60	20 ~ 100	30 ~ 130	20 ~ 130	30 ~ 500
L	300	320	400	500	500 680	820	940
H	432	440	572	617	617 1140	1285	1455
h	170	170	180	280	280 380	550	600