Buffer strip surface material: ultra high molecular weight polyethylene
1 Tensile strength: 25N/mm² or more
2 Elongation: more than 350%
3 Impact strength: more than 10kJ/m
Recommended use: 1. High drop blanking point; 2. Blanking point with uneven material size; 3. High density blanking point; 4. Need to improve the seal to prevent spillage drop point.
Scope of adaptation: 1. Bandwidth: 650-2400mm 2. Tape speed: ≥4.5m/s 3. Capacity: ≥6000t/h 4. Material drop: < 3m
Matters needing attention
1. Do not expose yourself to the sun;
2. The buffer strip cannot collide during transportation and installation;
3. Rollers must be installed at both ends of the buffer, otherwise it will affect the service life of the bufferLife.
Complaint
