Uncoiler(manual/automatic) | Weight Capacity | 3T |
Inner Diameter | 460-520mm | |
Outside Diameter | 1400mm | |
Coil width | Max 600mm | |
Feeding | Pinch rollers | one pair, up and down |
straightening device | Straightening rollers | up three, down four |
Diameter of rollers | 75mm | |
Roll Former | Frame type | single station |
Forming Roller stand | about 14 Groups | |
Shaft material | High grade 45# steel, | |
Heated and quenched | ||
Shaft diameter | 70mm | |
Roller material | GCr15 | |
Drive Type | By gear box | |
Motor | 11KW reducer with | |
requency control | ||
Punching | Punching type | Hydraulic |
Mould material | Cr12 | |
Holes distance | Can be adjusted | |
Cutting | Type | After-cutting, hydraulic |
Hydraulic cutter | Material of mould | Cr12 |
With quenching treatment | ||
Cutting tolerance | 10M+/- 2.0 mm | |
PLC cabinet | PLC | PANASONIC /Mitsubishi |
Length Controller | Encoder | |
Operation | Touch Screen | |
Transducer | Mitsubishi | |
Hydraulic station | Hydraulic station power | 11 KW |
Hydraulic pressure | 15 Mpa | |
Runout Table | Non-power type | 2 pcs |
Material | Galvanized steel sheet | |
Material Thick | 1.5-2.5mm | |
Forming Speed | 8-12m/Min |
1.How to maintain the machine?
Answer: add mechanical lubrication equipment to chain, bearing and cutting slide every month. Add mechanical lubrication to the case every half a year.