8 Ports L3 10g Fiber Switch with 4 SFP+ Fiber Uplink

Min.Order: 1
Product origin: Guangzhou, Guangdong, China
Infringement complaint: complaintComplaint
US$ 300 ~ 320

Description
L3 8 Ports Fiber Network Switch with 4*10G SFP+
S5312S-4SE
 
Model S5312S-4SE
Hardware
Fixed Port8*100/1000M SFP
4*1G/10G SFP+
PoE PortNone
Console Port1*console port
Reset Key1
CPU400MHz ARM® Cortex™-A9
DDR4G DDR3 1333MHz
BufferFully integrated 1.5 MB packet buffer
FLASH64M
RAM256M
Bandwidth256Gbps 
Packet Forwarding92.32Mpps
MAC Address16K
Network ProtocolIEEE 802.3
IEEE 802.3u 100BASE-TX
IEEE 802.3ab1000BASE-T
IEEE 802.3x
IEEE 802.3z 1000BASE-X
IEEE 802.3ad
IEEE 802.3q ,IEEE 802.3q/p
IEEE 802.1w,IEEE 802.1d ,IEEE 802.1S
STP(Spanning Tree Protocol)
RSTP/MSTP( Rapid Spanning Tree Protocol)
EPPS ring network protocol
EAPS ring network protocol
Port Specification10/100/1000BaseT(X)Auto
Transmission ModeStore and Forward(full wirespeed)
LED IndicatorPWR:Power LED
SYS:(System LED)
PowerBuilt-in DUAL power AC 100~240V 50/60HZ
Operating Temperature/Humidity-20~+55°C;5%~90% RH Non coagulation
Storage Temperature/Humidity-40~+75°C;5%~95% RH Non coagulation
Physical sizeProduct size: 440mm*230mm*45mm
Packing size: 515mm*325mm*95mm
N.W/G.W(kg)1.5kg/2.2kg
Installation  type1U Rack type, 19 "
Lightning protection level3KV 8/20us;
IP30
CertificateCE mark, commercial;CE/LVD EN60950;
FCC Part 15 Class B;RoHS;
WarrantyWhole device for 1 year(Accessories not included)

Software Feature
Port
Port ShutdownSupport
Port SpeedSupport autonegtiate, full-1000, full-100, half-100, full-10, half-10
Flow Controlsupport full-duplex IEEE 802.3x, half-duplex back pressure
Storm ControlSupports rate limit for broadcast, multicast, and DLF packets
Storm ConstrainSupport the detection of broadcast packets, multicast packets,
or unicast packets on the port, shutdown the port if the rate is over the threshold.
Port MirrorSupport
Port Rate LimitSupport port ingress and egress rate limit
Link AggregationSupport manual link aggregation
Support LACP dynamic link aggregation
Supports up to 32 aggregation groups, each group up to 8 ports
Support source MAC, destination MAC, source destination MAC, source IP, destination IP, source destination IP routing strategy
Port IsolateSupport
Jumbo FrameSupport up to 16KB packet
Redundant PortSupport
MAC
MAC Table Capacity16K
MAC Table ManagementSupport
Forwarding modeSupport IVL forwarding mode
Static MAC AddressSupport
MAC Address BindingSupport
MAC Address FilteringSupport
MAC Learning ControlControl the MAC learning based on port
VLAN
Number of VLANs4K
802.1q-based VLANSupport
MAC-based VLANSupport
IP-based VLANSupport
Protocol-based VLANSupport
Voice VLANSupport
VLAN MappingSupport 1:1 mapping
QinQSupport basic QinQ
Support flexible QinQ
Reliability
Spanning Tree ProtocolSupport STP/RSTP/MSTP
Port Loop DetectionSupport
EAPSSupport
ERPSSupport G.8032/Y.1344
LLDPSupport LLDP & LLDP-MED
UDLDFully compatible with CISCO's UDLD protocol
VLLP (VRRP Layer-2 Loop Protection)Support, Only used with VRRP
L3
ARPSupport static and dynamic ARP
Static RouteSupport
VLAN InterfaceSupport 32 VLAN interfaces
RIPSupport RIP v1/v2
OSPFSupport OSPFv2
Policy RouteSupport
VRRPSupport
Multicast
Static Multicast MAC AddressSupport
IGMP SNOOPINGSupport IGMP SNOOPING v1/v2/v3
Support IGMP Querier
Support IGMP SNOOPING Filter
MVRSupport
GMRPSupport
ACL
Standard IP-based ACLSupport
Extended IP based ACLSupport
MAC IP-based ACLSupport
MAC ARP-based ACLSupport
ACL Port FilteringSupport
Time-based ACLSupport
QoS
Port Queue Number8
Port Queue Scheduling ModeSupport WRR,RR,WDRR,SP
Port-based ClassificationSupport
802.1p-based ClassificationSupport
DSCP-based ClassificationSupport
ACL-based ClassificationSupport
QoS PolicySupport packets mapping to queue
Support COS or DSCP Remarking
Support rate limits of data flow
Support data flow statistics
Support mirroring of data flow
DHCP
DHCP Client Support
DHCP SnoopingSupport
DHCP RelaySupport
DHCP ServerSupport
DHCP option 82Support
Management
CLI  ManagementSupport Console, Telnet and SSH
WEB ManagementSupport HTTP and HTTPS
SNMP ManagementSupport SNMP v1, v2c
Support SNMP TRAP
Support lots of standard and private MIBs
User ManagementSupport multiple user management
Log ManagementSupport local log management
Support SYSLOG
RMONSupport RMON 1, 2, 3 and 9 groups
Cluster ManagementSupport NDP
Support NTDP
Support manual and automatic joining of cluster groups
Support cluster unified management
Configuration FileSupport uploading and downloading configuration file
Upgrade softwareSupport
Clock ManagementSupport local clock management
Support SNTP
Security
Switch Management SecuritySupport enabling and disabling TELNET, WEB and SNMP services
Support TELNET, WEB and SNMP services to bind to standard IP ACLs
Support for limiting the number of TELNET connections
CPU Protection The switch's own security protection prevents large data streams from attacking the switch itself.
AAASupport 802.1x
Support RADIUS
Supports authentication, authorization, and accounting through RADIUS server
Support port-based and MAC-based 802.1x
Support 802.1x guest VLAN
IP MAC BindingSupport static configuration of IP, MAC and port binding
DHCP SNOOPINGSupport dynamic ARP binding to prevent ARP spoofing
Support dynamic IP, MAC and port binding
Support fixed port to connect to DHCP server to prevent private connection to DHCP server
Prevent ARP SpoofingSupport manually configuring MAC ARP-based ACL rules to prevent ARP spoofing.
Support the DHCP SNOOPING function. During the process of obtaining an IP address by DHCP, the switch dynamically binds ARP to the port to prevent ARP spoofing.
Debugging
PINGSupport
TRACEROUTESupport
TELNET ClientSupport

Product Tag:
Related categories:
Scroll to Top