Satin Grey & Pearl White Metallic Epoxy Floor Coatings

Min.Order: 100

Product origin: Guangzhou, Guangdong, China

Infringement complaint:

Complaint

US$ 4.5 ~ 5.68

Description

2:1 Clear Resin for Metallic Floor and 3D Epoxy Floor

Item (HF2118)	Epoxy Resin(A )	Epoxy Hardener (B )
Color	Transparent Liquid	Transparent Liquid
Viscosity@25ºC(mpa.s)	1000-1500 CPS	400-500 CPS
Specific Gravity	1.15	0.96
Mixing Ratio(by weight)	2	1
Hardness(Shored)	80 D
Operation time(100g mixed glue ,25ºC)	40 Minutes
Hardening conditions	25°C × 7H -8H
Shelf Life	12 Months

Feature
HF2118 of Metallic Marble Epoxy floors are 100% solid, two component epoxy. It is a special formulated epoxy with a pearlescent metallic pigment that looks like marble. It is roller or squeegee applied to your floor.

The finished Metallic Stained epoxy floors look is a smooth, glass like finish that has a unique and subtle reflective sparkle. No two floors will ever look the same. There are endless creative techniques that can be used to create a style that you can call your own.

Some of our customers say the Metallic Stained floor resembles moon craters, a lava lamp, lighting strikes, marble counter-tops;shimmery glitter paint and they appear three dimensional.

Leave the ordinary behind with Metallic Stained floor and see just how simple decorative seamless flooring can really be. Check out some of the reasons that make Metallic Stain, without a doubt, the system for you.

1. NO VOC, NO BPA, NO TOXIC
2. FD&A Approved,
3. UV Resistant
4. Can automatic antifoaming
5. High gloss like mirror
6. Can automatic leveling

Operation Notice:
1. The ground to be constructed needs to be kept dry and clean;
2. When using, please check the A agent first, observe whether there is sedimentation, and fully stir the A agent evenly;
3. Take the amount according to the proportion, and the weighing is accurate, please remember that the proportion is the weight ratio rather than the volume ratio. After the A and B agents are mixed, they must be fully stirred to avoid incomplete curing;
4. Please carry out construction in time after mixing evenly, and try to use the mixed glue within the available time;
5. During the curing process, please keep the environment clean to prevent impurities or dust from falling onto the surface of the uncured glue.

Characteristics after curing:
1)Hardness: Shore D >82
2)Withstand voltage: 22 KV/mm
3)Bending strength: 28 Kg/mm2

Precautions:
1. This kind of products must be stored in a tightly closed environment and protected from light under the condition of 25°C relative humidity <70%.
2. As this type of product B agent is easy to absorb water vapor and cause deterioration, the packaging barrel must be tightly sealed as soon as it is used.
3. After mixing, it will gradually solidify, its viscosity will gradually rise, and part of the heat will be released;
4. The more the amount of glue mixed together, the faster the reaction and the faster the curing speed, which may be accompanied by a large amount of heat. Please pay attention to control the amount of glue at one time, because the reaction speed increases and its use time It will also be shortened, and the mixed glue should be used up as soon as possible;
5. Usable time: refers to the time that the viscosity of 100g mixed glue doubles under the condition of 25ºC. After not the operational time, the glue should never be used;
6. During the operation, you must wear glasses and other necessary labor protection supplies to protect yourself.