Upgrade Plastic Building Roofing Material, High Weather Resistance Left/Right Gable Flashing Board for Roof

Min.Order: 2,000
Product origin: Tianjin, China
Infringement complaint: complaintComplaint
US$ 9.8

Description
Product NameSilicon Calcium Ancient building roof tileBrand NameGUANG SHENG JIA
Width size1050mmThickness3mm
Main materialSodium silicateSurface materialPMMA
Weight 5.5kg/sqmLength sizeCustomize
Surface TreatmentAnti-counterfeiting embossingWarrantyMore than 5 years
Fire ProtectionB1Heat Resistance-40°- 75°
Applicable slope20° - 80°Use life50 years


Product Description
 
Details Images
Company Profile

0000
Building show
The advantages of Silicon Calcium ancient building rooftile
 
1) Light weight, easy installation--- 5-6kg per square meter, which greatly reduces the weight of the building. The single sheet
has a large area and no longitudinal overlap, which reduces the construction difficulty and time-consuming.
2) Super weather resistance and long-lasting color ---- the surface material is ASA film with high weather resistance, which is
resistant to high temperature, acid, alkali and salt and other chemical substances. Even if it is exposed to strong ultraviolet rays,
high heat, low cold and other climates for a long time, it can still fade 5% in 10 years .
3) Good fire resistance - the heat insulation components and flame retardant components in the product have strong fire
resistance, and are judged to be flame retardant Class B in the fire protection code for interior decoration design of buildings.
4) Good impact resistance - due to the adoption of HTRE composite technology, the impact performance of the product is more
than three times that of synthetic resin tiles of the same thickness.
5) Strong load resistance - the tiles are placed on the flat ground and rolled by trucks without cracks or damage. Put the tiles in
the air with an interval of 500mm, and place an item with a weight of 150kg on it, and there will be no cracks and deformation on
he tile surface.
6) Resistance to heavy rain --- due to the large area of the tiles, no vertical overlap, and the seamless connection between the
relevant accessories and the main tile, no matter whether it is heavy rainfall or light rain, it will not cause roof rainwater to leak.
7) Resistance to strong winds - the characteristics of the calcium-silicon ancient building
tiles and the perfect construction design technology allow the roof on which the tiles are laid to resist strong winds and avoid damage
caused by the sliding of the tiles.
8) Lightning protection - because it is an insulating material, it will not cause a fire source caused by lightning.
9) Renewable and environmentally friendly materials, safe and odorless. Recyclable at end of life.
 
The accessories


About installation
 
  1. We suggest the roofing slope angle is between 20-80 degree.
  2. Arrange installation line.Installation line should be arranged in advance in order to ensure smooth and beautiful.
  3. Install purline. Purline suggest square tube(60mm*40mm*3mm), or Section steel (100mm*50mm*3mm) ,or wooden square (60mm*40mm) .  The metal purlins shall be dealed with anti-rust treatment. The wooden square must be treated with anti-corrosion.The space between 2 purlines is no more than 600mm. The uppermost purlin is 150mm away from the roof ridge line, which is convenient for the installation of main ridge tiles, and the lowermost purlin is 50-70mm away from the eaves
  4. Deal with the oblique gutter and flashing. Gutter size is according to the project building size at site. Fix the oblique gutter on purline.
  5. Install main tile roof of covering the main slope. Roof tile installation on main slope should use the right fixing tools.  Use electric drill to make holes and keep hole diameter 2mm bigger than screw. Tapping screws with diameter of 6.3mm is recommended. It can't fix too hard to tight. When install roof tile,it should be opposite to local wind direction. T wo slope installation at the same time. Ensure the main ridge tile installation without any problem.
  6. Install main tile roof covering of secondary slope. Roof tile installation on secondary slope. Set the central line of triangle slop as a bench mark. Installation is from the bench mark to both sides avergely. Cutting a long with the Hypotenuse of the triangle slope,In prepareaiton of installing tilted ridge tile. Make sure no obvious gap between 2 slops.
  7. To install the main ridge tile, be sure to install it sequentially from one side to the other,to avoid overlap on two main sheet.
  8. Install tilted ridge roof tile. When install the tilted ridge tile must fix on main tile purline. The overlap place for 2 tilted ridge at least 90mm
  9. Install three way ridge tile. Connect three side slope roofing. Fix on the top of main ridge and 2 tilted ridge.
  10. Install the cover of tilted ridge.
  11. Deal with roof protrusions and the seams
  12. Install all of the eaves board and the endcaps of main ridge tile.
 
 
 
FAQ
 
 
Q:Can we visit your factory
A:Warmly welcome.Once we have your schedule, we will arrange the professional sales team to follow up your case.

Q:How many tons can load per container
A: It can load 28 tons each 20ft container

Q:How is your Payment Term?
A:One is 30% deposit by TT before production and 70% balance against copy of B/L;The other is Irrevocable L/C 100% at sight.

Q:Can you provide sample?
A:Yes, for regular sizes sample is free but buyer need to pay freight cost.

Q:Why choose our company ?
We are specialized in this industry for more than 15 years

Q: What are the shipping ports?
A: Under normal circumstances, we ship from Tianjin.

Q:What's your delivery time ?
A:Within 15-30 days after receiving advance payment or L/C at sight

Q:Can you guarantee your products quality?
A:Best quality is our principle all the time. Because we have a long-term development plan.
 
Product Tag:
Related categories:
Scroll to Top