Energy Saving Low Pollution Combustion Vertical Nox Boiler for Industrial

Min.Order: 1
Product origin: Jiaxing, Zhejiang, China
Infringement complaint: complaintComplaint
US$ 10000 ~ 42000

Description

Product Parameters

ModelONS4-5060100120150200
Rated heat capacityKg/h5006001000120015002000
Maximum operation pressureMPa1.0/1.25
Steam generatorHeat efficiencyMore than 96%
Heat transfer area (m2)4.85.67.18.49.39.9
Water retention of furnace body (L)21222626.828.729
Net weight (kg)7207501050112014801520
Using power supply (V)220V/380V
Total power consumption (kw)3.04.44.46.27.79.7
Blower motor (kw)1.52.22.24.05.57.5
Water supply pump motor (kw)1.52.22.22.22.22.2
Outside dimensionswidth(mm)80080095095010501050
length(mm)180018001860186021002100
hight(mm)200020002300230023502350
Natural gas consumption Nm2thermal efficiency 96%39.547.478.193.2117.1156.2
Burner link portBurning formUltra-low nitrogen pre-plane combustion(ultra-1ow nitrogen emission <30mg/m3
Combustion control(Electronic proportional)
Ignition modeHigh voltage ignition/secondary pre ignition
Secondary pre-ignition Gas inlet(DN)252540405050
Steam outlet diameter(DN)32324040Double 40Double 40
Inlet water diameter(DN)252525252525
Chimney diameter(DN)200200250250325350

Product Description

Onisi Ultra-Low Nitrogen (NOX) tubular steam boiler
Structure Feature

Daxi boiler adopts the revolutionary ultra-low nitrogen large plane combustion technology, operating noise as low as 70DB. (The combustion flame is composed of tens of thousands of micro flames. Combined with the unique micro combustion chamber technology of Daxi boiler, the flame cooled quickly and has high heat transfer coefficient, which greatly suppresses nitrogen oxide (NOX) Generation, purge heat loss reduced by 20%, makethe nitrogen oxide (NOx) exhaust as low as 30mg/m³.

The tube bundle furnace structure has high heat transfer coefficient and less water retention. Steam canbe produced in 1-3 minutes after the boiler is started. The heat is reduced by 20% during purging, and there is no preheating load loss. The operating efficiency is as high as 98%.

 
Fully premixed large flat-level burner
The most advanced forced air supply Ultra-low(NOx) plane combustion technology

Advanced square furnance body
The introduction of Japan's advanced square cross-flow corrugated furnace body, the volume is only 40% of the same type, easy to install and use in small spaces.

Heat transfer reaction bellows
Enhanced heat exchange efficiency, preheating only takes 30 seconds to 1 minute, and no preheating load loss. Combustion is carried out in water pipes, and the combustion temperature is low, which greatly controls the production of nitrogen oxid.es

Stainless Steel 304 Condenserr
Absorb damp heat, reduce exhaust gas temperature, improve boiler thermal efficiency, and resist corrosion

High safety, no need boiler license
No multiple interlocking safety protection, electronic overpressure and overtemperature water level logic error, mechanical safety protection, safe combustion overheating, scale detection protection

lntelligent control
lntelligent touch screen display working condition, remote control and online operation guide

 

Ultra-low nitrogen premixed plane burner

Onishi ultra-low nitrogen (NOx) condensing vacuum hot waterboiler innovation technology

Product advantages

Forced air supply full mixed ultra-low NOxLarege plane consumption techlology advantage:
1. Low Noize
adopt silent fan, proportional combustion, make noise to be low 70dB.

2. Ultra-low NOx
introduced Japan advanced full premixed large plane consumptiontechnology, make NOx emission strength lower than 30mg/m3.

3. High Efficency
combined the bellows beam furnace structure with Forced air supplytechnology, full premixed ultra-low (NOx) technology, large planecombustion technology , the heat efficiency reach up to 98%.

4. Quick Launch
adopt to the high efficiency bellows-type cooling furnace body, lowwater valume, steam generate within 1-3 minitues, reduce energyconsumption,save operate cost.

5. Wide Range of Flow Gas Pressure
avialable to the low gas-flow pressure area, all series of boliers highefficiently operate under 2kpa gas pressure.

6. lntelligent Control
touch panel show,virtual press button,breakdown self-diagnostic,full automatic operation, achieved man-machine remote control.

Company Profile

ZHEJIANGBOPAIINTELLIGENGTTECHNOLOGYCO.,LTD is high-tech company, which is specialized in intelligent cutting equipment design, research, and sales. With introducing foreign advanced technology and incorporating own experience in cutting field for many years, AOTOBOT has becomes the complete solution manufacture. It supplies CAD, spreading machine, smart cutting machine for soft material cutting industry. The company's products have been used from traditional textiles and clothing to the outdoors. car home furnishing. sofa seat, medical treatment, industrial textile industry and other fields. And successfully developed cutting technology for glass fiber, aerospace materials, bulletproof materials, synthetic materials. The company's products are all over Germany, the United States. The company's product has been sold to Germany, United states, Brazil, Vietnam, Cambodia, India, Kazakhstan and other countries. Also established branch in Vietnam. With rich experience and R&D ability, AOTOBOT could provide customized service and personalized product. also it supplies systematic cutting solution. Has invested enormous amount of energy on intelligent factory automation, AOTOBOT hugely promotes production efficiency and solve factory intelligence problems for customer factory Our aim is to create reliable products with professional technology and win the recognition of users with good after-sales service. Business philosophy: Integrity and cooperation, and win-win future. Corporate culture: unity, diligence, refinement, and innovation. Future development, we will open. more intelligent cutting custom era.

 

FAQ

Q1. Are you a factory or a trading company?
(ZHEJIANG BOPAI INTELLIGENT TECHNOLOGY CO., LTD.)is a national high-tech enterprise specializing in the design, research and development, production, sales and service of intelligent cutting equipment. We have more than 15 years of manufacturing experience, and our products
were exported to more than 80 countries and regions.

Q2. Where is the advantage of your machine ?
Our  cutting system technology developed from Japan  since 40 years ago,  till now , we have sold to
More than 40 countries.
Aotobot brand cutting machine equipped with all the specifications . Bopai company  appled  the Patent of double knife plate which hugely improved the cutting speed by double time.  Aotobot equipment  supply   YASAKAWA  motor and drive system,
Adsorption device, bristle cleaning automatically,air cooling system, knife intelligence technology etc. 

Q3. how about the installation and after sale service?
A: we have one strong and professional after sale service team,all the engineers with more than 10 years experiences.  We can send technical to  supply training and installation.  Also we have distributors in all over the world, which also can take care of the after sale service daily.

Q4. How do you guarantee your quality?
A: With more than 40years of manufacturing experience, our products are
superior to the domestic standard and meet the Japan standard.  All the  main device  are
Importing from Japan . machines run well without confusion on problem.

 

 

 

Product Tag:
Related categories:
Scroll to Top