Description
What is OTESALY® Vital 2ml Skin Boosters injection?
OTESALY® VIATL products can help to gradually improve your skin's condition, increase elasticity, and reduce fine lines and imperfections, such as scarring. A refreshed look can be achieved with OTESALY® VIATL Skinboosters treatments. Skin Boosters are a brand new approach to nourishing your skin, they are specially designed to deliver deep skin hydration. Hydration levels in the skin are increased, resulting in lasting moisturization and improvements on the skin's surface, creating a fresh and natural look.
The OTESALY® VIATL range of Skin boosters is the only stabilized HA product available for skin revitalization. This stabilization ensures a long-term effect. It is targeted at a broad range of treatment areas including the face, neck, decolletage (the area between the neck and breasts) and hands; designed to replenish the HA lost through aging, hence hydrating the skin and improving its elasticity and tone.
Advantage of OTESALY® Vital 2ml Skin Boosters injection?
As with other dermal fillers, Otesaly® VITAL works by eliminating volume deficiencies and allowing the skin to be gently lifted for desired effects. Other dermal fillers out there, e.g those used for targeting the chin and cheeks, are harder and less dynamic; Otesaly® VITAL is, comparatively, a lot softer. The way other DermalFillers bring about their effects is mainly via mechanical properties. Otesaly® VITAL, on the other hand, work by exerting its biochemical effects.
Difference between Otesaly® VITAL & Otesaly® DermalFiller
★ Otesaly® VITAL also known as hydrating filler, are micro-injections of HA. How they differ from the more commonly known dermal fillers comes down to how they are injected. Instead of being injected underneath the skin's surface to enhance, they are injected into the skin to hydrate and improve overall skin quality.
★ Otesaly® VITAL is a less complex combination that only includes the HA (water) of DermalFiller without the binding compound that provides volume, fullness and lifts. When injecting into the skin, the filler is formulated with antioxidants and vitamins causing new collagen and elastin to be produced that result in healthy-looking, glowing and plump skin.
★ Dermal fillers focus on lifting, enhancing and restoring volume, providing a natural and rejuvenated appearance. As the skin ages, the production of collagen and elastin slows, which gives skin a loose and supple look.| Type | OTESALY® Vital
2ml |
| Composition | 20mg/ml cross-linked sodium hyaluronate gel |
| Inject method |
Inject by syringe or mesotherapy gun.
The recommended injection technique is the micro-puncture technique which involves injecting very small amounts of Otesaly® Vital into the deep dermis, about 1- 2cm apart. Once injected, the NASHA gel flows smoothly and distributes evenly in the skin.
|
| Function | inject long-lasting Hyaluronic Acid right into the skin to make it plumper and more even. It can also soften fine lines, smooth acne scarring and improve your skin's firmness and elasticity. Clinical studies show that results may last up to 15 months.
Treatment for thin sensitive skin that specifically lacks hydration and plumpness.
Treating the upper face and neck area
Hydrating lips ironing out wrinkles and dryness
Treating sun-damaged skin |
| Where to inject | Dermis |
| Volume of syringe | 2ml |
| Needle size | 2pcs * 30G |
| Duration | 14-18months |
| Storage | 2-25 Degrees Celsius |
| Recommended treatment |
Initially: 3 treatments, 4 weeks apart
Maintenance treatment: Every 9 to 15 months depending on the individual's lifestyle and age. |
About AOMA CO., LTD
1. Main productsOur product lines include Cross-linked dermal filler, bo- tox(100iu, 130iu, 150iu), Mesotherapy solutions for skin rejuvenation and whitening, Meso PDRN series and daily skin care products.2. TrademarkOur trademarks are OTESALY and SOMED, which are registered in Russia in USA, Europe, Russia, Kazakhstan, Iraq, Brazil, Mexico, Colombia, etc.
New trademark in 2021, JEALIFILL, with CE approved.3. 18 Years of HistoryAOMA CO., LTD was established in 2005, covers an area of 4,800 square meters of factory, 3 production lines, and started exporting medical products in 2006.We are a verified supplier of MADE IN CHINA for more than 13 years with a good reputation.4. GMP workshopOur factory covers an area of 4,800 square meters, founded with 800 square meters of 10,000 class purification workshops and 300 square meters of 100 class purification workshops. The production area is about 3,200 square meters. we have a terminal sterilization technology and strict quality control system, The sodium hyaluronate gel is sterilized by high-pressure steam, and the needle is sterilized by gamma rays. The preparation is aseptic and pyrogen-free, which ensures the safety and high quality of the products without pollution.5. Top production equipmentWe have the most advanced production equipment imported from European countries, such as an Automatic vacuum filling and stoppering machine from Germany OPTIMA, a two-door cabinet type sterilizer from Sweden GETINGE, Agilent HPLC, UV, Shimadzu GC, Malvern rheometer, etc.6. Strict clinical testWe entered the clinical test in 2006 and cooperates with medical institutions such as The First Affiliated Hospital of Zhejiang University, Shanghai Ninth People's Hospital, etc. The results show that our cross-linked sodium hyaluronate gel for plastic surgery can meet the clinical needs, the quality of the prepared products is stable, the filling effect is good, the maintenance time is long, and the rate of adverse reactions is low.7. CE, ISO 13485 CERTIFICATE.AOMA CO., LTD imports the F-D-A & Europe EDQM approved raw material of Medical Sodium Hyaluronate Gel which costs around 45,000USD/ kg from the USA and is the earliest product in China that has obtained dual certification of CE and international GMP certification. More than 4 million people worldwide have used AOMA CO., LTD products so far. 96% of customers buy again after trying AOMA CO., LTD products.Package:
1. One syringe and two needles in a PVC blister. One blister and instruction in a retail box.
2. Ten Pieces of products are delivered in a white box.
3. One hundred pieces of products are delivered in a hard carton.
Out packing specification(1piece): 50*40*28cm
4. Two hundred pieces of products are delivered in a hard carton.
Out packing specification(1piece): 58*45*47cm
Middlebox(10pieces)specification: 34*33*10cm
Shipping:
By air, delivery will be made within 2 working days after payment.
Storage:
Store at 2-30ºC. do not freeze. Protect from light sources.
Do not use it after the Expiration date.
Store for two years.
Payment Term:
TT(wire transfer), Western Union, credit card and Paypal...
Feedback from our clients
Complaint
