https://bodavalve.en.made-in-china.com
The pneumatic actuator mechanism is an actuator powered by compressed air. Its main characteristics are simple structure, high output thrust, reliable operation, stable performance, convenient maintenance, low price, intrinsic safety and explosion-proof, etc
Acting Type | Double Acting | customized | customized |
origin | china | production capacity | 50000pcs |
1. Pneumatic actuators can be directly installed and connected to valves, or can be installed and connected through brackets and joints. The connecting fasteners must not be loose.
2. Ensure the coaxiality of the actuator output shaft and valve stem installation, and rotate flexibly without any crawling phenomenon.
3. The connecting pipes, joints, accessories, etc. should be clean and clean.
4. The exhaust port of the solenoid valve is always downward. When it is upward or horizontal, a bend should be connected to make the exhaust port downward.
5. Before debugging, it should be confirmed that the air pipeline is unobstructed and that the air pressure, voltage, signal, etc. meet the requirements.
6. Compressed air should be filtered, dried, and dehumidified below a dew point of -15 ° C.
7. During debugging, the solenoid valve should be turned to the automatic position.