Haiwang Hw-Mn08 Wall Mounted Microwave Sensor China Manufacturer Wholesale/Supplier High-Quality Default No Blocking Block Time Single-Board Microwave Induction Module

Min.Order: 100
Product origin: Shenzhen, Guangdong, China
Infringement complaint: complaintComplaint
US$ 1.2 ~ 2.3

Description

HW-MN08 Microwave Sensor Module

First, the product name:

HW-MN08 is the latest single-board microwave induction module of the company. Its appearance is exquisite, the circuit structure of the product is simple and compact, the performance is stable, the cost is reasonable, and its cost performance is high. It is especially suitable for electronic appliances such as intelligent electrical appliances, security products, and lighting products. Secondary development of the field. This product can be widely used in security monitoring, intelligent control systems, and lighting appliances (garages, corridors, roads, etc.).

 Second, the product works:

According to the Doppler effect principle, the HW-MN08 microwave sensor module uses a planar antenna to transmit and receive high-frequency electromagnetic waves and then detects that the foldback wave has a slight movement change, which in turn triggers the microprocessor to work. Finally, the OUT terminal outputs 3V effective high power. Flat signal.

 Third, product features:

Professional flat with antenna design, field-shaped transceiver signal, wide-coverage, high consistency, low power consumption, in line with ROHS environmental protection, and strong anti-interference ability, not affected by temperature, humidity, airflow, dust, noise, light, and dark.

When the product is used indoors, the sensing effect is better; when it is used outdoors, the sensing distance is slightly reduced or the sensitivity is slightly weak due to the influence of the environment. This is a normal phenomenon, and the user does not have to question the product.

 Fourth, the output sensing time:

The default repeatable trigger: If the output signal is triggered for the first time, when the sensing area is triggered again, the module delay time will be superimposed again when the first trigger time is not stopped (for example, the module trigger time is 10s, and it is accepted again within 10s). The sensing signal is superimposed for 10s, and there will always be an output signal when it is continuously triggered without interruption. Non-repeatable triggering: The sensor is triggered once, and the time is not superimposed (for example time 10s, trigger once, output 10s, no matter how many times the trigger is invalid within 10s, the time is not superimposed once for 10s).

When this product is used indoors, the sensing effect is better; when it is used outdoors, the sensing distance is slightly reduced or the sensitivity is weak due to the influence of the environment. This is a normal phenomenon, and users do not have to question the product.
Product Parameters
Product numberHW-MN08(mini)Single board sensing moduleVersion: V1.4Conventional without pin header
Operating VoltageDefault DC-3.3VPay attention to distinguishing between positive and negativeNote: need to maintain power supply stability
Static power<3MA UnloadedDynamic 3MAStatic 2.7mANote: Do not load directly
output method1:3V-3mA-TTLBy default, the sensor output is high-level 3v, and no sense level is low-level 0v.
0: 0V
Induction methodDoppler induction principle, electromagnetic waves form a detection zone and detect moving objects.
Trigger modeRepeatable trigger  
delay2S-Repeatable triggerRuntime-1KThe time size can be defined according to customer requirements.
Block timeDefault no blocking  
frequencyActively radiate electromagnetic wave signal center frequency 3.2G.
Sensing distance10mDistance-680K
Operating temperature-20-70°CustomizableRecommended to stay away from heat sources
Dimensionssize=L18*W16.7*D2mmLength X width X heightmmWithout pin header
Product Description

???????

FAQ

1. Are you a factory or trading company?
We are a professional manufacturer established in 2004, with more than 20 years of experience in the security protection industry.

2. How can I get a sample to check your quality?
The sample order is acceptable. Please contact us for more details.

3. What's the Payment?
- T/T would be better with quick transfer and few bank fees.
- L/C, Western Union, and PayPal. VISA and MasterCard are acceptable.

4. How long is your delivery time?
- 1-3 working days for sample order
- for general order, 3-20 days after advanced payment
Please contact us for more details.

5. What about the warranty?
- For the strobe/sensor, we provide 18 months warranty; parts are 2 years.
- for the alarm panel, we provide 24 monthly warranty.

6. Where is your factory located? How can I visit there?
Our factory locates in Shenzhen, in China, Near Hongkong and Guangzhou. We are warmly welcome you to visit our factory and cooperate with us.

7. What's your advantage? Why did we choose you?
- Factory price. Over 15 years of experience in this industrial area
- Great production capacity, support OEM&ODM
- 100% new materials, with a defective rate lower than 0.2%.





 
 
Product Tag:
Related categories:
Scroll to Top