| Character | Parameter Values | Instruction |
| Fixing gap | 0~2mm,typical fix gap 1mm | When the rotary frequency is high, the installation clearance shall be as small as possible. |
| Target tooth width | 2 mm±0.1 mm | Tooth module m=1.25, Iron Gear |
| Target groove width | 2 mm±0.1 mm | Tooth module m=1.25, Iron Gear |
| Tooth depth | >3mm | Tooth module m=1.25, Iron Gear |
| Tooth width | 10mm | Tooth module m=1.25, Iron Gear |
| Working temperature | -40~140ºC | Continue operating temperature |
| Service voltage | DC4.5~24V/ DC10~30V | |
| Max reverse voltage | 60VDC | |
| Operating current | 16mA | |
| Load current | <80mA | |
| Signal output form | square wave, collector, open collector | 90°phase difference between two signal A and B channels.
when open collector output, the inner pull-up resistor is 5KΩ |
| AB phase-difference | 90±45 Degree | Tooth module m=1.25 |
| Output high Level | >(VCC-0.5V) | |
| Output low level | <0.5V | |
| Response frequency | 1~20KHz | |
| Signal rise time | <10us | |
| Signal fall edge time | <1us | |
| IP grade | IP67 | Can be operated in liquid environment |
| Connecting form | AMP 4pins | VCC GND A B |
Complaint
