Factory Supply SLES 70% for Detergent Powder Raw Material

Min.Order: 1
Product origin: Changsha, Hunan, China
Infringement complaint: complaintComplaint
US$ 880 ~ 960

Description
Product Description

SODIUM LAURYL ETHER SULFATE

CAS. No.: 13150-00-0
Molecular Formula: C18H37NaO7S
 
SLES 70% is a kind of anionic surfactant with excellent performance. It has excellent detergency, emulsification, wetting, dispersion, densifying and foamability performance, it is easy to dissolve in water.As well as has wide compatibility,favorable hard-water resistant and high-biodegradation ability and low irritation to skin and eye.
 
Sodium Lauryl Ether Sulfate widely used in liquid detergent, such as dishware, shampoo, bubble bath and hand cleaner, etc. SLES can also be used in washing powder and detergent for heavy dirty. Using SLES to replace LAS, phosphate can be saved or reduced, and general dosage of active matter is reduced. In textile, printing and dyeing, oil and leather industries, it is lubricant, dyeing agent, cleaner, foaming agent and degreasing agent.
 
Features
1. Good cleaning, emulsifying, wetting, densifying and foaming performance
2. Good solvency, wide compatibility, strong resistance to hard water, high biodegradation, low irritation to skin and eye.
Test ItemSpecification
ApperanceWhite or    Slightly Yellow Pour able gel 
 
OdorNo strange odors
Active matter content %68~72
Unsulfated matter %≤3.0
Inorganic sodium content %≤2.0
Dioxane(ppm)≤30
Color(Klett, 5%Am.aq.sol.)≤20
PH(1% ap.sol.)7.0~9.5







 
1.  How Do You Control Your Quality?
 
We maintain good quality control by following these procedures below:
 
(1) ChoiceChem Only Uses High-Purity Raw Material
 
By using 99.8% pure imported S, the high-purity S allows for the generation of very high-purity SO2. This is further used to create a much better high-purity Sodium Bicarbonate than what is usually available in the market. 
 
(2) Strict Factory Inspection System
 
All our products are tested every 2 hours, and sub-standard products are allowed to leave the factory.
 
We also carry out third-party tests every 3 days to ensure that our in-house tests are properly calibrated and accurate. 
 
(3). Strict Package and Loading System
 
ChoiceChem only uses high-quality packages, and we always pack the cargo after it has cooled off totally to avoid expansion caused by SO2.
 
The cargo can be loaded directly in our factory, whole the loading process can be inspected by our in-house supervisors.
 
2.  What Is Your Delivery Time?
 
(1) Our delivery time is regularly updated according to the level of orders every day.
 
(2) Our current output is 300MT daily. This allows most cargo orders to be delivered within 7 to 10 days usually.
If it is China, where Entry-Exit Inspection and Quarantine (CIQ) inspection of cargo is needed, an extra 1 week will be required for applying and accepting CIQ inspection.
 
If you need an OEM package, colorful package, or need to engrave (for printing), we will need around 5 to 7 days for this.
 
Also, printing bags need around 1 to 3 days, and domestic transportation will require around 3 to 5 days, so an extra 2 weeks will be needed.
 
For the black color marks package and to engrave (for printing), we will need around 1 to 2 days for this. Printing bags need around 1 to 3 days, and domestic transportation for this will also require around 3 to 5 days, so an extra 7 to 10 days will be needed;
 
Would you kindly inform us about your purchase quantity and your expectation for receiving the cargo, please?
 
Do kindly contact our sales representative and we will check it for you immediately, please.
 
3. How Do You Make Sure That Delivery Is On Time?
 
(1) Our output is 300MT daily, which usually allows for most cargo orders to be delivered within 7 to 10 days.
 
(2) ChoiceChem's average rate of on-time deliveries has remained above 98.9% for the past 3 years. This level of consistency is what makes us unique and our reputation for being very dependable is solid.

(3) We also guarantee that if delivery is not made in time, we will provide compensation at the rate of 0.25% of the contract amount per week till it is delivered.
 
 4. Can You Do OEM Packages? 
 
Yes, we can do OEM packages per your request.
 
ChoiceChem also offers free package designing services. After you decide to work with us, our professional marketing team will help you to build your brand in your market.
 
 5. What's The MOQ For OEM Package?
 
The MOQ is usually 5000 pcs. of bags, but if there are only 1000 pcs. of bags available, we can also do it.
 
 
6.  Do You Have Stock?
 
1. We sell goods and, because we always get orders in line before we start production, we don't usually stock goods. All produce is to the customer's orders. 
 
2. Our goods storage period is less than 3 days, to maintain the freshness of the goods.
 
3. Our output is 300MT daily, which usually allows for most cargo orders to be delivered within 7 to 10 days. May I know when you need the cargo, please?
 
7. I Need To Get Registered Before Importing. Can You Help With The Registration?
 
Could you kindly tell us your full registration documents requirements, please?
 
I will check with our registration department for you and we will try our best to help you finish your registration soon.
 
8. Are You A Factory?
 
We are the biggest Sodium Bicarbonate producer in the south of China for more than 20 years now. 
 
Welcome to ChoiceChem. Kindly contact our sales representative for more information about our factory.
Product Tag:
Related categories:
Scroll to Top