Description
380V/220V hoist rail device of Slaughtering machine
The machinery is widely used in slaughtering industry, a mechanical descent equipment. The main track form is pipe rail. Its descent height can be customized according to the actual needs of users. The use of the equipment greatly reduced the labor intensity of the workers and doubled the production efficiency. It was mainly used for the decline of the carcass of cattle (horse or sheep) during the tetrad operation.
380V/220V hoist rail device of Slaughtering machine
The machinery is widely used in slaughtering industry, a mechanical descent equipment. The main track form is pipe rail. Its descent height can be customized according to the actual needs of users. The use of the equipment greatly reduced the labor intensity of the workers and doubled the production efficiency. It was mainly used for the decline of the carcass of cattle (horse or sheep) during the tetrad operation.
Equipment Line in Customer Plant
The structural characteristics.
This equipment is widely used in cattle slaughtering industry as a mechanical descent equipment. The main track form is pipe rail. Its descent height can be customized according to the actual needs of users. The use of the equipment greatly reduced the labor intensity of the workers and doubled the production efficiency, which was mainly used for the decline of carcass in tetrad operation.
Use and maintain
1) The whole machine of this equipment is factory-made, and it shall be installed according to the process diagram and run after the installation is completed." During test run, it is necessary to pay attention to whether the equipment has running noise, and whether the running direction of the chain is correct. If abnormal sound is found, stop the check immediately, mainly check whether there is any foreign matters in the transmission part and whether the installation position of the speed reducer and the transmission part meets the process requirements.
2) The equipment shall be wiped and maintained for a period of one week. Check the tightness of the chain and whether the lubricating parts need to be filled with grease.
3) Before the equipment is used, the equipment shall be allowed to run for a period of time, and the equipment shall be put into operation after the equipment has no abnormal condition.
4) Daily inspection before each shift operation;
5) The user must establish the necessary rules and regulations and safety operation procedures.
Safety operating essentials
1) it is strictly prohibited to put hands and other things into the machine while the machine is working to prevent injury to people or damage to the machine
2) if the machine has abnormal working sound, it should stop and check immediately to prevent the machine from causing great damage and injury to personnel
3) the machine must be cleaned and maintained while stopping, and the power supply is cut off and a warning plate is put up
4) shut off the power supply after work
5) the operator should have the knowledge of mechanical and electrical operation
6) the operator should be familiar with the structure, performance, safety regulations and the instruction of the machine, etc
7) operators should be trained and certified to work
8) daily inspection should be conducted before each shift
9) users must establish necessary rules and regulations and safety operating rules
Rapair
repair, adjust or replace parts immediately if they do not meet the requirements. The following requirements should be achieved in repair:
1) the replacement should be the same as the raw material performance during maintenance;
2) when the slope type hoisting and descending machine is in working condition, no maintenance and repair shall be carried out.
Galvanized Steel Automatic New Cattle Hydraulic Peeling Slaughter Machine
Cattle/Cow Fully New Bloodletting Orbital Delivery System Slaughtering Machine
Complaint
