High Carbon 12mm Ungalvanized 8*19s Elevator Steel Wire Rope

Min.Order: 500

Product origin: Wuxi, Jiangsu, China

Infringement complaint:

Complaint

US$ 5 ~ 100

Description

Today, as in the past, wire ropes are used in different types, designs and sizes. Starting with gear shifts for bicycles to brake cables and elevators, used in the world's tallest buildings, in industry and on cruise ships. However, ropes are also used to operate aircraft or to lift gates. There is hardly any area where wires or ropes are not required and used.
Elevator wire rope is one kind of wire rope, it's the important safe part of elevator.
JIEFENG is the professional elevator and escalator parts supplier in China, JIEFENG have own factory, very good at elevator wire rope, so we can supply all kinds of elevator wire ropes that you neeed.

JIEFENG ELEVATOR WIRE REOPE
Item	PP NF	Natural Fiber	Half Steel	Steel Core
Construction	6×19S+PP/NF	8×19S+NF(Natural fiber core)	8×19S+8×7+PP (Half steel core)	8×19S+8×7+1×19W(Steel core)
Rope diameter(mm)	6mm	8-16mm	8-16mm	8-16mm
Tensile(Mpa)	1370/1770	1370/1770	1570/1770	1570/1770
Speed(m/s)	1.75-2.0m/s	1.75-2.0m/s	2.0-3.0m/s	>3.0m/s
Meter Per Ton	7446m	4490-1122m	3935-984m	3720-930m
KG/100meter	13.43kg	22.27-89.1kg	25.41-101.63 kg	26.88-101.63 kg
MOQ	1000m-one container	1000m-One Container	1000m-One Container	1000m-One Container

Who we are?
We are the professional elevator and escalator parts supplier in China-JIEFENG, JIEFENG have own factory and also cooperation with lots of factories.
Best quality, professional, nice price are our advantages

Why choice us?
JIEFENG have own elevator wire rope factory, and we also cooperation lots ofelevator wie rope factories, so we can supply all kinds of elevator wire ropes, suitabe all of your needs, cheapest, higher cost performance, best quality we all have, professional in the elevator wire rope industry for over 20 years.

How to test the elevator wire rope?

Handling of wire ropes prior to and during installation
1)     reels are best transported on the job site by rolling on a clean flat surface or by lifting from a pipe in the reel center hole.
2)     Wire rope should be stored indoors, off the ground and covered to protect it from moisture, dirt, dust, sunlight, etc.
3)     Care must be taken to unroll and not laterally pull wire rope when paying it off the reel. Kinking and dragging ropes over sharp edges must be avoided.
4)     ropes must be prevented from rotating during installation since free- hanging ropes will untwist under their own weight. The use of reeving splices is recommended and these are available on page 18.
5)     loose rope ends should always be seized or secured with cable bands to prevent untwisting. Cable bands are available on page 18.
The installers should continually inspect wire rope during installation to identify any areas which may have been damaged in shipment or while in storage on the job site.

How can get the sample ?
We can do customized samples.
We can supply samples within 5 days if available in stock, around 10-30 days for customized samples.
Sample fee and express fee will be returned once your order reaches 1 ton.

Forward

Related products