Complaint
Literally Trailblazing
IP65 Waterproof Outdoor Commercial Lighting Fixture | Die casting man
Type of Protection: IP 66
Power Factor: ≥0.9
Impact Protection: IK09
Working Voltage: 100v-277v
FAP83 30W is ideal for outdoor commercial project.
LED Security floodlight lighting fixture is applicable for both commercial and residential illumination at the places where need a large amount light such as parking lots, driveways, outdoor courts (basketball, tennis, volleyball, etc.). With the dusk to dawn function
Features:
IP65 waterproof/dust proof/explosion proof/IK08
Pure Aluminum shape good at heat dissipation
Angle Bracket,easy to install by drill
Easy replacement and installation
SMD 3030 Ra>70/SDCM<7
50,000 times switching cycle before failure
Total harmonic distortion(THD)<20%
Application:
COMMERCIAL LIGHTING
Large retailers / School / Billboard / Building .etc
PUBLIC LIGHTING
Airports / Stadium / Train stations / Bus stations
INDUSTRIAL LIGHTING
Factory Warehouses / Parking lots/ Exhibition centers/ Gas stations / Toll stations etc.
IP66 CE ROHS
Temperature Characteristics T-ambient 25ºC
Temperature Operating -20~+45ºC
Storage -40~+60ºC
Electrical Characteristics
Input Voltage:AC180-240V / AC127V / AC100-240V
50/60Hz PF:>0.9
Power Efficiency:>=0.90
Product Dimension
| Model NO. | Size L(mm) | Size W(mm) | Size H(mm) |
| FAP81 | 104 | 83.4 | 25.7 |
| FAP81-PIR | 104 | 160 | 45 |
| FAP82 | 121 | 95.3 | 26.4 |
| FAP82-PIR | 121 | 165 | 45 |
| FAP83 | 161 | 123.2 | 29.6 |
| FAP83-PIR | 161 | 197 | 45 |
| FAP85 | 207 | 161 | 31.5 |
| FAP85-PIR | 207 | 228 | 45 |
| FAP810 | 269 | 209 | 34 |
| FAP815 | 330 | 250 | 34 |
| FAP820 | 388 | 288 | 36 |
| FAP830 | 445 | 334 | 45.5 |
| FAP840 | 490 | 410 | 48 |
Mounting hole size
| FAP81 | 50 | 14.5 | 6.5 |
| FAP82 | 57 | 14.5 | 6.5 |
| FAP83 | 57 | 14.5 | 6.5 |
| FAP85 | 129.5 | 14.5 | 6.5 |
| FAP810 | 140 | 20 | 8.3 |
| FAP815 | 140 | 20 | 8.3 |
| FAP820 | 240 | 20 | 8.3 |
| FAP830 | 240 | 20 | 8.3 |
| FAP840 | 240 | 22 | 11 |
| Model | Power | Light Source | LED QTY | CCT(K) | LM/W | CRI |
| FAP81-10W | 10 | 2835 | 13 | 6500k | 85 | >70 |
| FAP82-20W | 20 | 2835 | 26 | 6500k | 85 | >70 |
| FAP83-30W | 30 | 2835 | 39 | 6500k | 90 | >70 |
| FAP85-50W | 50 | 2835 | 78 | 6500k | 90 | >70 |
| FAP810-100W | 100 | 2835 | 143 | 6500k | 90 | >70 |
| FAP815-150W | 150 | 2835 | 195 | 6500k | 90 | >70 |
| FAP820-200W | 200 | 2835 | 286 | 6500k | 90 | >70 |
| FAP830-300W | 300 | 2835 | 390 | 6500k | 90 | >70 |
| FAP840-400W | 400 | 2835 | 507 | 6500k | 90 | >70 |
| S.No | Requirement | Requirement | Test Standard |
| Physical requirements | |||
| 1 | Housing type | Heavy-duty rugged pressure die-cast aluminium alloy | ISO 3522 |
| 2 | Cover | Tempered Glass | |
| 3 | Gasket | Silicon Rubber gasket | |
| 4 | Housing wattage range | 30W 40W 50W 60W 80W 100W 150W 200W 220W 240W | |
| 5 | Socket Options | NEMA socket, Photocell, Smart controller, Shorting Cap | |
| 6 | Stainless-steel components | Minimum 316L Grade 316L | |
| 7 | IP Protection | IP66 | IEC 60529 |
| 8 | IK Protection | IK08 | IEC 62262 |
| 9 | Tool free opening | Tool-free access to gear compartment | |
| 10 | Corrosion tests in artificial atmospheres - Salt spray tests | EN/ISO 9227 - Corrosion tests in artificial atmospheres - Salt spray tests for 1000 hours | EN/ISO 9227 |
| 11 | Vibration test | ANSI C136.31 - Roadway and Area Lighting Equipment - Luminaire Vibration | ANSI C136.31 |
| LED and Optics | |||
| 1 | LED Make | Osram/CREE | |
| 2 | LED Type | >2W High power LED with ceramic base (3V - Single chip die) >2w | |
| 3 | LED driving current | <750mA | |
| 4 | LED life | >100,000 hours @L95 | LM80 and TM21 |
| 5 | Optics Material | UV PC | |
| 6 | Lighting distributions | Type I, II, III, IV | |
| Thermal Requirements | |||
| 1 | Product ambient temperature range | -40°C to 55°C | |
| 2 | Product Storage temperature range | up to 85°C | |
| 3 | LED Case temperature (Tc) | <75°C @50°C ambient temperature | UL1598 |
| 4 | Driver Case temperature range | <85°C @50°C ambient temperature | UL1598 |
| Performance | |||
| 1 | Input Voltage Range | 110V 120V 220V 270 305VAC - 50/60Hz | IEC 60598-2-3 |
| 2 | Power Factor | >0.90 | IEC 60598-2-3 |
| 3 | THD | <20% | IEC 60598-2-3 |
| 4 | Surge Protection | 10KV | |
| 5 | Dimming | 1-10V or 1-10V+DALI | |
| 6 | Appliance class | Class I or Class II | IEC 60598-2-3 |
| 7 | CCT | 3000K/4000K/5700K | ANSI C78.377A |
| 8 | CRI | >70Ra | ANSI C78.377A |
| 9 | MacAdam | <3 Step Binning | ANSI C78.377A |
| 10 | Product life | >100,000 hours @L80 | TM28 |
| 11 | Lumen efficacy As per LM-79 | ≥ 160lm/W (25°C ambient temperature) | LM-79 |
| 12 | Lumen efficacy As per LM-82 | Not more than 5% difference form LM79 result | LM-82 |
| 13 | LED module connector and wire joint connectors | UL approved | IEC 60598-2-3 |
| 14 | Electrical wires between Driver and LED modules and NEMA socket and driver | Must be UL approved | IEC 60598-2-3 |
| 1 | what are your MOQ requirements | 1-5 pieces for samples. 100MOQ for mass production. For your first order we can accept small quantity. |
| 2 | what about the LED Chips? | We can use the led chip that you required. |
| 3 | What about the LED driver? | We use any brand that you required. |
| 4 | What is your main product ? | Die-casting Man supply design, tooling, die-casting injection, machinning, painting, assembling and testing service for street light and OEM die casting products. |
| 5 | Guarantee of your product? | We offer 5 year guarantee for our customer. 50000 hours and 5 year guanrantee |
| 6 | Doea your fixture pass New EPR and Harmonics | Yes we are |
| 7 | Surge Protect | atleast 4kV for L-N and 6kV N/L-PE depends on which brand of drvier that you use. |
| 8 | Are you able to sell empty house | Yes we sell empty house |
| 9 | Do you have a body with easy plug and play module and driver installation | Yes, I suggest out type YASL-20 to you. Please see attached catalog page. |
| 10 | Can I put logo on the house? | Yes you can. We have two options. First option screen printing your logo on the house, no MOQ required. Second die casting logo on the house, MOQ 1000 pieces each item. There will be additional cost for both screen printing and die casting logo. |
| 11 | If I have some defective goods, what will you do? | If occasionally defective goods, we will send you free replacement with your next order. If defective rate >1%, We will send you free replacement components like driver, SPD, PCB with leds. We will not cover the freight and maintaining cost in your country. |
| 12 | what services can you provide? | Accepted Delivery Terms: FOB,CIF,EXW; Accepted Payment Currency:USD,EUR,GBP,CNY; Accepted Payment Type: T/T,L/C,D/P D/A,PayPal; Language Spoken:English,Chinese,Japanese |
| 13 | how can we guarantee quality? | Always a pre-production sample before mass production; Always final Inspection before shipment; |
