2025V 2035V 2045V 2535V 2545V 3545V Type V Series Double Hydraulic Vane Pumps for Rubber Machinery

                       
              2025V 2035V 2045V 2535V 2545V 3545V Type V Series Double Vane Pumps
                   
V Series double pumps Shape and introduction
 
These series of composition vane pumps in high performance are developed for industrial application. They can be applied properly in the hydraulic system of plastic injection machinery, rubber machinery; casting machinery, machine tool industry, etc. The main features are:

1.The designing structure of composition vanes reduces its impact on the stator,so the pumps will have further stability and longer lifetime while working with high pressure and high speed.

2.The designing structure of composition vanes itself reduces the noise. TThe design of 12 vanes makes smaller flow pulsation and lower noise. 3.Multi-displacement option and the cartridge structure of oump core make flexible application and easy maintenance.


Vickers V series  2025V 2035V 2045V 2535V 2545V 3545V hydraulic vane pump advantage:
1. High performance, low noise and long service life
2. Completely interchangeable with original
3. Very competitive price
4.1 year of warranty
5. For industrial machinery and agricultural machinery etc.  

Model Descriptions:

(F3-)	****V	**	A	**	(F)	**	*	22	*
Front marks	Codeof series	Displacement codeshaft end pump	Pump portcon nection	Displacement codecover end pump	Mountingtype	Shaft extension	Pump position	Designing No.	Direction of rotation
No mark:water-in oilemulsion ofpetroleumseries F3:Sul phosuccinidester fattyof acid	2520V	10,12,14,15,17, 19,21	A-SAE4-Bolted flange	2,3,4,5,6,7,8,9,10, 11,12,14	No mark-flangemounting F-footmounting	1-straight shaftwith key 86-heavy-dutystraight shaftwith key 11-spline shaft	See as the following table	22	viewed from the shaft end of the pump L-counter clockwiserotation R-clockwise rotation
	3520V	21,25,30,32, 35,38,45		2,3,4,5,6,7,8,9,10, 11,12,14
	3525V	21,25,30,32, 35,38,45		10,12,14,15,17, 19,21
	4520V	4245,50,57, 60,66,75		2,3,4,5,6,7,8,9,10, 11,12,14
	4525V	42,45,50,57, 60,66,75		10,12,14,15,17, 19,21
	4535V	42,45,50,57, 60,66,75		21,25,30,32,35 ,38,45

 
Operation and Maintenance

Hydraulic oil
It is recommended to adopt anti-wear hydraulic fluids with viscosity of32cst-68cst under the temperature of 40ºC, or automobile crankcase oil with alphabetic marks of SC, SD, SE or SF. The recommended viscosity under ratedrotation speed and rated pressure should range from 13cst to 54cst with the temperature range of 49ºC to 65ºC.

Cold start
In the case of adopting SAE 10W type hydraulic oil with viscosity between 860cst and 54cst, the operating rotation speed and pressure shall be limited within 50% of rated rotation speed and rated pressure respectively, until the system warms up. Particular attention should be paid to make sure that the whole system including the cylinder and motor on the far away side shall be all warmed up, when the pump starts up with the hydraulic oil viscosity exceeding 860cst.

High temperature operation
While working under high temperature, the viscosity shall not be less than 134cst, and the temperature shall not exceed 99ºC. Otherwise, the service lifetime of pump core components and sealing parts will be reduced.

Noise data
The average conditions for noise value testing of series of pumps:
1. Test with rotation speed of 1500r/min in mute laboratory.
2. Anti-wear hydraulic oil with the viscosity of 30cst.
3. The testing temperature of hydraulic oil ranges from 45ºC to 50ºC.
4. The distance between the noise sampling site alnd the back side of pump shall be one meter away.

Factory  Workshop /Production Line


COMPANY PROFILE
Dongguan Blince Machinery & Electronics Co., Ltd
specializing in design,manufacturing and sales of hydraulic product include hydraulic orbital motor,radial piston motor,hydraulic pump,hydraulic steering control unit,and oil cooler. Orbital motor from small OMM type to large torque OMS,OMT and OMV series.Vane pump include Yuken PV2R series, Vickers V10/20 V/VQ series and Tokemic SQP series. Denison T6 series.Radial piston motor like NHM1 to NHM31. We are located in Dongguan city which is an manufacturing city nearby Shenzhen port and Guangzhou port.It is very convenient for us to arrange shipment by sea..

For hydraulic equipment, please look for Blince!


Packing & Delivery & Payment Term & Our Service

FAQ
Q1:Can you provide a sample before a big order?       
A:Yes, we can .

Q2:Can I have my brand on the products?
A:Of course you can.

Q3:How about your quality?
A:Most of the excavator/loader/Engineering vehicle companys is our customer in China, we also have confidence to supply goodproducts to our foreign customers.

Q4: How long has your company run in Hydraulic Fields?
A:Over 15 years

Q5: Which payment terms do you accept?
A:L/C T/T D/A D/P Western Union Paypal Money Gram

Q6: What is your delivery time?
A:It depends on whether the products you buy is in stock.If in stock, ship it within 3-5 days, if not, it will be decided by the time of factory production.

Q7: What's the warranty of your products?
A:One Year after shippment.

Q8: Is your company accept customization?
A:We could accept OEM depends on quantity.