DC24V AC220V Four-Wire System 4-20mA Output Thermal Gas Mass Flow Meter

Min.Order: 1

Product origin: Shanghai, China

Infringement complaint:

Complaint

US$ 650 ~ 700

Description

The thermal mass flow meter is an instrument for measuring gas flow by using the principle of thermal diffusion. It measure gas mass directly and also it needn't temperature and pressure compensation.

The thermal mass flow meter sensor part is composed of two reference platinum resistance temperature sensors (RTDS), one is the speed sensor RH, and the other is the temperature sensor RMG, which measures the temperature change of the gas. When the two RTDS are placed in the measured gas, one sensor RH is heated and the other sensor RMG is used to sense the measured gas temperature. As the gas flow rate increases, the airflow carries away more heat, and the temperature of the sensor RH drops. The temperature difference between the two RTDS is linearly related to the flow rate, and then this relationship is converted into a linear output through micro-electronic control technology, thus to realise the measurement of gas flow.

Performance	Technical parameter
Structural form	Insertion type	In- line type
Measuring medium	All gases (except Acetylene)
Pipe diameter range	Caliber DN32 or higher	DN10~DN2000mm
Velocity range	0.1~120Nm/s
Precision	±1~2.5%
Operating temperature	Sensor:-40ºC~+220ºC convertor:-20ºC~+45ºC
Working pressure	Medium pressure≤2.5Mpa	Medium pressure≤4.0Mpa
Power supply	DC24V or AC220V≤18W
Response speed	1s
Output signal	4-20mA (Photoelectric isolation, large load 500Ω),pulse,RS-485 (photoelectric isolation),HART agreement
Alarm	1-2 relay normally open contact,10A/220V/AC,*/30V/DC
Type of supply	Separate structure, integrated structure
Pipe material	Carbon steel, stainless steel, plastic, etc
Field display	Four lines of Chinese liquid crystal display
Display content	Mass flow, standard volume flow, cumulative flow, standard time, cumulative running time, standard flow rate, etc
Protection grade	IP65
Sensor material	Stainless steel	Stainless steel, carbon steel

Installation Tips

When installing the instrument, it should be far away from elbows, obstacles, irregular diameters, and valves to ensure a stable flow field. it requires a long straight pipe, with the upstream straight pipe length greater than 10xD and the downstream straight pipe length greater than 5xD.
When the site cannot meet the requirements of the straight pipeline, the gas rectifier can be connected in series to greatly reduce the requirements of the straight pipe section.
If the flow meter is installed outdoors, the meter shade should be added to avoid the sun and rain.
Do not install in strong vibration and contain a lot of corrosive gas environment.
Do not share the power supply with the equipment that pollutes the power supply such as the frequency converter and welding machine, and if necessary, install the purified power supply for the instrument.
Before installation, please reconfirm the connection method of the pipe segment and prepare flange connection related items such as gaskets and bolts. Production must be stopped before installation, and the relevant regulations of the factory must be strictly observed.