Complaint
| Technical Parameter | |
| Voltage | 12V/24V/36V/48V/110V/220V/230V/240V/380V/415V/600V |
| Wattage | Customized |
| Tube diameter | 6mm/8mm/10mm/12mm or customized |
| Immersion length | 200-2000mm |
| Sheath Material | Stainless steel 304, 316L, 310S,Copper, Titaninum, incoloy800, incoloy840 |
| Welded Elements QTY | 1element, 2 element, 3 elements, 6 elements, 9 elements, 18 elements or under customer request |
| Screw Thread size | G / NPT / BSP Thread 1'' 1 1/4'' 1 1/2'' 2'' 2.5'' 3'' |
| Round Flange size | DN50 DN80 DN100 DN120 DN150 DN200 etc |
| Square Flange size | 2.5'' x2.5'', 3'' x 3'' or customized |
| Terminal Cover Material | Stainless steel, Plastic |
Please consider the following factors in order to select the proper sheath material:
| Sheath Material | Application |
| Stainless Steel304 316L | Light oils , In forced oil circulation loops |
| Stainless Steel304 316L or Copper | Water, Freeze protection, Hotwater storage, Boilerandwaterheaters, Coolingtowers, Solution not corrosive to copper, Food equipment |
| Stainless Steel 316L 310s or Incoloy | Oil, Heavy and non-circulated oils, Solution water, Corrosive solutions, Steam super heating |
| Stainless Steel304 316L | Process water, Soap and detergent solutions, Soluble cutting oils, Demineralized or deionized water |
| Stainless Steel304 316L | Fluid heat transfer media, Tar, High to low viscosity petroleum oils, Asphalt, Wax, Paraffin, Degreasing solvents, Alcohol, Molten salt, Solutions not corrosive to steel |
The following sections will help you select the best flange heater that will meet the requirements of your application.
• Hot Water Storage Tanks
• Warming Equipment
• Preheating All Grades of Oil
• Food Processing Equipment
• Cleaning and Rinsing Tanks
• Heat Transfer Systems
• Process Air Equipment
• Boiler Equipment
• Freeze Protection of Any Fluid
