Complaint
| Technical parameters | GRT8-ST |
| Function | Delay ON star /Delta |
| Supply terminals | A1-A2 |
| Voltage range | AC/DC 12-240V(50-60Hz) |
| Burden | AC 0.3-2VA/DC 0.1-1.2W |
| Voltage range | AC 230V(50-60Hz) |
| Power input | AC max.6VA/1.3W |
| Supply voltage tolerance | -15%;+10% |
| Supply indication | green LED |
| Time ranges | Range of time delay t1:0.1s-10min,Switch time t2:0.1s-10s |
| Time setting | potentiometer |
| Time deviation | 10%-mechanical setting |
| Repeat accuracy | 0.2%-set value stability |
| Temperature coefficient | 0.05%/ºC,at=20ºC(0.05%ºF,at=68ºF) |
| Output | 2×SPDT |
| Current rating | 16A(AC1) |
| Switching voltage | 250VAC/24VDC |
| Min.breaking capacity DC | 500mW |
| Output indication | red LED |
| Mechanical life | 1×107 |
| Electrical life(AC1) | 1×105 |
| Reset time | max.200ms |
| Operating temperature | -20ºC to+55ºC(-4ºFto131ºF) |
| Storage temperature | -35ºC to+75ºC(-22ºFto158ºF) |
| Mounting/DIN rail | Din rail EN/IEC 60715 |
| Protection degree | IP40 for front panel/IP20 terminals |
| Operating position | any |
| Overvoltage category | III. |
| Pollution degree | 2 |
| Max.cable size(mm 2) | solid wire max.1×2.5or 2×1.5/with sleeve max.1×2.5(AWG 12) |
| Tightening torque | 0.4Nm |
| Dimensions | 90×18×64mm |
| Weight | W240-82g,A230-80g |
| Standards | EN 61812-1,IEC6947-5-1 |
