| Technical parameters | GRL8-01 | GRL8-02 |
| Function | 2 level contorl mode | 2 or 1 level contorl mode |
| Supply terminals | A1-A2 |
| Voltage range | AC/DC 24-240V(50-60Hz) |
| Input | max.2VA |
| Supply voltage tolerance | -15%;+10% |
| Sensitivity ( input resistance) | adjustable in range 5 kΩ -100 kΩ |
| Voltage in electrodes | max. AC 5 V |
| Current in probe | AC <0.1 mA |
| Time response | max. 400 ms |
| Max. capacity length | 800 m (sensitivity 25kΩ), 200 m (sensitivity 100 kΩ) |
| Max. capacity of probe cable | 400 nF (sensitivity 25kΩ), 100 nF (sensitivity 100 kΩ) |
| Time delay (t) | adjustable, 0.1 -10 s |
| Accuracy in setting (mechanical) | ± 10 % |
| Temperature coefficient | 0.05%/ºC,at=20ºC(0.05%ºF,at=68ºF) |
| Output | 1×SPDT |
| Current rating | 1×10A(AC1) |
| Switching voltage | 250VAC/24VDC |
| Min.breaking capacity DC | 500mW |
| Output indication | red LED |
| Mechanical life | 1×107 |
| Electrical life(AC1) | 1×105 |
| Reset time | max.200ms |
| Operating temperature | -20ºC to+55ºC(-4ºFto131ºF) |
| Storage temperature | -35ºC to+75ºC(-22ºFto158ºF) |
| Mounting/DIN rail | Din rail EN/IEC 60715 |
| Protection degree | IP40 for front panel/IP20 terminals |
| Operating position | any |
| Overvoltage cathegory | III. |
| Pollution degree | 2 |
| Max.cable size(mm 2) | solid wire max.1×2.5or 2×1.5/with sleeve max.1×2.5(AWG 12) |
| Tightening torque | 0.8Nm |
| Dimensions | 90×18×64mm |
| Weight | 70g | 72g |
| Standards | EN 60255-1 |
Complaint
