Description
Paper Cutting Rotary Cutter Blade Paper Slitter Circular Knives Manufacturers
The slitting machine blade is also called the disc longitudinal (rolling) shearing machine blade, which is used in the metallurgical strip steel slitting industry. Slitting slitting machine blades, slitting machine garden knives, etc., are named after the vertical occlusion of the upper and lower sets of knives. The slitting machine blades are used for trimming, slitting, etc. of thin, medium and thick plates. 10mm-2000mm, the accuracy can reach within 0.003, the thickness tolerance is +0.001, and the smoothness can reach within 40.8.
Components: blade, rubber gasket, spacer
Bottom slitting knives are available Single Sided and Double Sided both in one piece or two halves (to enable quick changes to take place) or as Multi Knife Blocks for use with Top Dished Slitter Knives in a variety of materials to suit each particular application. The bottom knives can be made from various material: 9CrSi,Cr12MoV,LD,D2,HSS,W6M5Cr4v2,W18Cr4V,H13,H13K,HMK,SKD11,SK2,SKH51, SKS7,YG8,YT15,P20,P30.
- Thickness up to 80mm,tolerances of up to +/- 0,005mm .Flatness within +/- 0,005mm
- Parallelism tolerances within 0.003mm (0.00012 inch)
- Outer diameter of up to 1300mm.
- Used for Steel coil slitting line , combine with other slitting line tools ,like steel spacers ,rubber bonded rings ,separator discs,separator spacers and etc
- Made from 6CrW2Si, D2, H13 , H13K , etc with 52-62HRC
| Top Slitter blades | Bottom slitter blades |
| Items | Common Size (OD*ID*T(mm) | Items | Common Size (OD*ID*T(mm) |
| 1 | φ60*φ20*1.2 | 1 | φ70*φ45*3/5 |
| 2 | φ62*φ40*1 | 2 | φ70*φ45*8/10 |
| 3 | φ68*φ46*0.8 | 3 | φ70*φ45*18/20 |
| 4 | φ75*φ45*1 | 4 | φ80*φ40*8/10 |
| 5 | φ90*φ60*1.2 | 5 | φ80*φ50*3/5 |
| 6 | φ100*φ35*1.2 | 6 | φ80*φ50*8/10 |
| 7 | φ100*φ60*2 | 7 | φ80*φ55*3/5 |
| 8 | φ105*φ65*1.2 | 8 | φ80*φ55*8/10 |
| 9 | φ105*φ66*1.2 | 9 | φ80*φ60*3/5 |
| 10 | φ105*φ70*1.2 | 10 | φ80*φ60*8/10 |
| 11 | φ105*φ70*3 | 11 | φ80*φ60*26/30 |
| 12 | φ105*φ75*1.2 | 12 | φ90*φ65*3/5 |
| 13 | φ105*φ80*1.2 | 13 | φ90*φ65*8/10 |
| 14 | φ110*φ70*1.2 | 14 | φ100*φ70*13/15 |
| 15 | φ118*φ80*1.2 | 15 | φ105*φ60*13/15 |
| 16 | φ120*φ76*4/2 | 16 | φ108*φ80*8/10 |
| 17 | φ120*φ80*1.2 | 17 | φ108*φ80*26/30 |
| 18 | φ125*φ85*1.2 | 18 | φ108*φ47*20 |
| 19 | φ140*φ95*1.2 | 19 | φ114*φ100*40 |
| 20 | φ150*φ75*3/2 | 20 | φ200*φ165*92 |
| 21 | φ150*φ90*3/2 | 21 | φ200*φ180*55 |
| 22 | φ190*φ75*3/2 | 22 | φ250*φ188*30 |
| 23 | φ190*φ80*3/2 | 23 | φ280*φ240*92 |
| 24 | φ190*φ90*3/2 | 24 | φ300*φ260*92 |
| NO | Common Size (OD*ID*T(mm) | NO | Common Size (OD*ID*T(mm) |
| 1 | φ95*φ55*2 | 10 | φ240*φ120*10 |
| 2 | φ105*φ32*3 | 11 | φ260*φ120*10 |
| 3 | φ105*φ52*5 | 12 | φ280*φ160*10 |
| 4 | φ120*φ60*5 | 13 | φ300*φ180*10 |
| 5 | φ160*φ80*5 | 14 | φ320*φ200*10 |
| 6 | φ200*φ100*5 | 15 | φ330*φ200*10 |
| 7 | φ210*φ100*5 | 16 | φ360*φ220*10 |
| 8 | φ220*φ100*5 | 17 | φ380*φ240*10 |
| 9 | φ220*φ120*5 | 18 | φ400*φ260*10 |
We also offer customized slitter blades according to customer requirements.
Why Use Lcut Machine Knives?
Lcut is technically reliable with over 30+ years of manufacturing experience in all types of industrial knives and blades. When you use Lcut knives and blades, you save money and worries about replacing them.
We are located in one of the largest production bases of Tungsten carbide products, we have a strong ability to access almost all quality steel and other materials available in the industry. Lcut manufactures all your knives and machines from the best quality steels procured from ISO 9001 certified mills and suppliers.
If you are looking for machine knives with extra longevity, less machine downtime, and fast turnaround time, Lcut is ready to help, we are super easy to work with!
What customized knives and blades does Lcut produce?You can contact Lcut sales engineers and make your own customized order to meet the exact requirements you need.
We can customize to your individual needs of below criteria: - Grades of steel
- Carbide
- Ceramic
- High carbon steel
- Hardened tool steel
- High-speed steel
- Stainless steel steel
- More
- Tooth designs
- Single/Double Bevel
- Perforated
- Serrated
- Zigzag
- Chisel
- EZ Open
- Many more
- Coatings/Notch
- Carbide
- Titanium Nitrate
- More
What materials does Lcut make its knives and blades?
Basically, the most widely used material in Lcut knives and blades are:
- Solid carbide & Carbide Inlaid (Precise cut, extra hardness and durability)
- Ceramic (Precise thin cut, widely used in film& foil, fabric cutting applications)
- Hardened tools steels (D2, A2, A8. S7, 1095, 1075, highly durable, moisture and abrasion resistant)
- High-speed steels (M2 HSS, M4 HSS, ASP23, High levels of hardness, friction, and heat resistance)
- Stainless steel grades (300 and 400 series, Stain and rust resistant, corrosion resistant, cost-effective)
- High carbon steels (52100 steel, Extra hardness, corrosion and wear resistance)
- CPM 10V/9V Cold/Hot steel (Stand for extreme cold and hot temperature, high impact, and stress, corrosion resistant)
- Spring steel (High yield strength for high-stress cutting jobs)
Lcut makes knives and blades from a wide variety of different materials. We select the best material as per what blades you need to cut and the consideration of the heat, cold, and moisture in the cutting applications.
What coatings on the blades does Lcut provide?
Lcut can make your knives and blades with any of the below coatings:
- Titanium Nitride Coating
- Titanium Carbon Nitride
- Electroless Nickle Plating
- Hard Chrome
Lcut makes sure evey pc of your knives and blades is packed in new and safe export packing so that no damages occur during transportation with different means to the point of destination.
Before shipping, all your knives and blades will have proper anti-rust treatment to ensure protection against damages during transportation and storage.
1. Are you manufacturer?Yes, Lcut is machine knives manufacturer and we are ready to be your factory partner for all types of industrial knives and blades, regardless of industries and applications. 2. What does Lcut Mean?
"L" comes from the initial letter of our company's Chinese name Linglite, " cut" is what we specialize in, we get the cut your want!
3. How long has Lcut been established?
Lcut was created in 1990s by Mr Zhang Yongxiang, during all these 30+ years, the company has gradually grown to be the leading manufacturer of machine knives and blades in the industry. Apart from conventional steel-made machine knives and blades, Lcut has quickly developed its own production lines of solid carbide knives and ceramic blades. We have been striving to increase our manufacturing capabilities and reduce costs so that you can get the best cut with the most competitive prices in the market.
4. What Does Lcut do?Lcut has over 18000 square meter's production workshop, 136 experienced workers, and QC in house, we have the technical know-how to manufacture and supply every machine knife and blade you need, no matter what edge or coating or steel you need, we can get the cut you want. 5. How soon can Lcut deliver the machine knives?
Lcut can manufacture and deliver most of the standard and customize knives and blades in 2-3 weeks. We also accept urgent orders depending on the specs and materials availability.
6. How to work with Lcut?
Working with Lcut can be simply easy. You send us the drawings/sketches/ prints or just samples, our technical team can identify any knives and blades.
After quotation and order is confirmed, Lcut production team will ensure your orders are processed in all right hands and finished in a timely manner. We conduct 100% inspection on all knives and blades we manufacture, full quality inspection reports will be provided upon request.
Lcut can handle DAP&DDP shipping and delivery to your door as well.
In conclusion, You want it, we manufacture and deliver it, and you have it!
7. Where to find Lcut?
Lcut factory is located in Sichuan, China, You are welcome anytime to contact our sales to arrange a visiting tour of our factory and workshops online.
Complaint
