Complaint
FSCUT1000 series is a low-cost fiber laser cutting solution for small power range application. FSCUT1000 is simplified from FSCUT2000 system, it integrates motion control and height control unit in one, is a cost-effective laser cutting control system.
| Model | FSCUT1000 |
| Control card | BMC1603 |
| I/O terminal board | BCL4562 |
| Motor control signal | X/Y1/Y2 axes pulse output, maximum frequency 3MHz Z axis analog output, -10 ~+10V X/Y/Z axes access encoder feedback, maximum sampling frequency 10MHz |
| Dedicated inputs | 6 limit inputs: X/Y1/Z axes +/- limit |
| Common inputs | 6 inputs: low-level active, supports NO and NC; |
| Software | CypOne Laser Cutting Control Software |
| Interface type | 32-bit PCI bus, 132MB/S |
| Power supply | 24V DC/2A |
| Work environment | Temperature: 0-55ºC Humidity: 5%-95%(no condensation) |
| Dedicated outputs | 2 DA outputs: 0~10V,50mA 1 PWM output: 5V/24V for option, precision of 50KHz (0.1%) |
| Common outputs | 8 outputs: relay output, 30V DC/5A |
FSCUT2000S medium power laser cutting system is a full-solution open-loop control system specially designed for sheet metal fabricaton industry, with features of easy to install and adjust, excellent performance and fully integrated solutions, it is the upgrade version from FSCUT2000C.
| Model | FSCUT2000S |
| Control card | BMC2104 |
| I/O terminal board | BCL3766 |
| Motor control signal | X/Y1/Y2/W axes pulse output, maximum frequency 3MHz X/Y1/Y2 axes port receive encoder feedback, highest sampling frequency 10MHz W axis port can be assigned as rotary axis or autofocus unit |
| Dedicated inputs | 8 limit inputs: +/-limit for X/Y1/Y2/W axes 4 origin inputs: X / Y1 / Y2 / W axes origin signal inputs: |
| Common inputs | 15 inputs: low-level active by default option, supports NO and NC mode. IN3~IN15 can switch between active low and active high |
| Software | CypCut Laser Cutting Control Software |
| Interface type | PCIE bus, X16, 250MB/S |
| Power supply | 24V DC/2A |
| Work environment | Temperature: 0-55ºC Humidity: 5%-95% (no condensation) |
| Dedicated outputs | 2 DA outputs: 0~10V,50mA 1 PWM output: 5V/24V for option, precision of 50KHz (0.1%) |
| Common outputs | 8 relay output, load capacity 250V AC/5A, 30V DC/5A 12 thyristor output, load capacity DC 24V/500mA |
Technical Data
| Model | FSCUT3000S |
| Software | TubePro tube cutting software/ CypCut sheet cutting software |
| Control card | BMC1805 |
| Interface type | 32-bit PCI bus, 132MB/S |
| I/O terminal board | BCL3766 |
| Power supply | 24V DC/2A |
| Motor control | X/Y1/Y2/W axis pulse output, heighest frequency 3MHz X/Y1/Y2 axis access encoder feedback, highest sampling frequency 10MHz W axis port can be assigned to rotary axis or autofocus unit |
| Work environment | Temperature: 0-55 ºC 5%-95% (no condensation) |
| Dedicated input | 8 limit inputs:Positive and negative limit for X/Y1/Y2/W axis 4 origin inputs:X / Y1 / Y2 / W axis origin |
| Dedicated output | 2 DA: 0~10V,50mA 1 PWM with 5V/24V for option, precision of 5KHz (0.1%) |
| Common input | 15 inputs: 12 are low-level active, 3 inputs can jump-wire switch to high-level active. |
| Common output | 8 relay output, load capacity 250V AC/5A, 30V DC/5A 12 thyristor output, DC 24V/500mA |
Q1. When did your factory establish?
