Complaint
Off Road Mobile Workshop Truck HOWO 4X4 Awd Mobile Maintenance Vehicle Mounted With Maintenance Tools LHD RHD
*
-----------------------------------------------------------------
*100% new condition by manufacturer direct sale*
*100% quality guaranteed*
workshop truck (also called maintenance truck, mobile workshop truck, repairing truck, Workshop light truck, Maintaining truck, maintenance vehicle, Mobile Workshop, Rescue vehicle etc.) is used to supply intended lube for trucks and machinery which are not convenient to go to the maintenance workshop or it's too far away from working place.
Workshop truck is usually quipped with air compressor, grease pump and lubrication equipments. Due to the rigid substructure and the robust shelter configuration, the lube truck has a good performance going cross country and less limitations for the place of deployment.
Workshop truck could used as a mobile workshop if equipped with an on-board power supply, versatile tool sets(mechanic tool kit, electrician tool kit), working floodlight, securing straps, etc as special requirements.
| Equipment for Off Road Mobile Workshop Truck HOWO 4X4 Awd Mobile Maintenance Vehicle Mounted With Maintenance Tools LHD RHD | |||||
| Item | Description | Technical Data | Measurement | Weight | Qty. |
| 1 | Chassis | As Option | |||
| 2 | Power Set (Generator) | Model: 40GF74-4 | 2030x650x1255(mm) | 1030kg | 1 |
| Rated Power: 40KW | |||||
| Rated Voltage: 400/230V | |||||
| Rated Frequency: 50Hz | |||||
| Rated Current: 72.2A | |||||
| Output: 3-phase, 4-line | |||||
| Diesel Engine: R4100ZD | |||||
| Generator Model: TZH-40 | |||||
| 3 | Welding Set | Model: ZX5-250B | 406x530x840(mm) | 160kg | 1 |
| Voltage: 380V | |||||
| Phase: 3 | |||||
| Frequency: 50/60Hz | |||||
| Initial Current: 29.6A | |||||
| Range: 25-250A | |||||
| Input: 19.2KVA | |||||
| Working Ambient: -10--+40oC | |||||
| 4 | Air Compressor | Model: AW3608 | 1180x410x850(mm) | 130kg | 1 |
| Voltage: 380V | |||||
| Frequency: 50Hz | |||||
| Power: 3KW | |||||
| Pressure: 0.7MPa | |||||
| Capacity: 0.36M3/mm | |||||
| 5 | Drilling Machine | Model: ZQJ4119AD | 760x490x260(mm) | 57kg | 1 |
| Bore Range: 3--16mm | |||||
| Power: 700W | |||||
| 6 | Vice | Size: 150mm | |||
| 7 | Grinding Machine | Model: MQ3225 | 1 | ||
| Size: 250mm | |||||
| Power: 700W | |||||
| 8 | Oxygen Cylinder | Volume: 40L | 1 | ||
| 9 | Acetylene Cylinder | 1 | |||
| 10 | Gas Welding Set | 1 | |||
| 11 | Working Bench | Steel Panel | 2300x550x780(mm) | 1 | |
| 12 | Hand Tools | M6--16 drilling set; Hack Saw; | |||
| Hammer; Portable Oil Pump; | |||||
| 3--16mm Thread Tapper; | |||||
| Spanner sets; Socket Spanner Sets | |||||
| Files; Clamps | |||||
| Tools | |||||
| No | Name | Specification | Quantity | ||
| 1 | Bow saw frame | 2 | |||
| 2 | Hacksaw blade | 18 tine; 32 tine | Each 1 | ||
| 3 | Manual oil gun | 1 | |||
| 4 | Oil pot | 300cc | 1 | ||
| 5 | Hand electric drill | 220V 0.6~6mm | 1 | ||
| 6 | Pipe expansion ware | 1 set | |||
| 7 | Electrical maintenance kits | with multimeter | 1 set | ||
| 8 | Screw tap | Coarse thread | 6/set | ||
| 9 | Screw tap | Fine thread | 3/set | ||
| 10 | Screw tap holder | 180mm;280mm | each 1 set | ||
| 11 | Screw die | Coarse thread | 6/set | ||
| 12 | Screw die | Fine thread | 3/set | ||
| 13 | Drill | 1-10mm (at intervals of)0.5mm | 2set | ||
| 14 | Drill | 11-16mm | 2sets | ||
| 15 | Drill | 3.4;4.2;5.1;6.8;8.5;10.2 | each 1 set | ||
| 16 | Steel ruler | 150mm,300mm | Each 1 | ||
| 17 | Vernier caliper | 150mm,250mm | 1 | ||
| 18 | Screw thread gauge | the metric system; British system | each 1 | ||
| 19 | Tape | 2m | 1 | ||
| 20 | Round head hammer | 2.5 pound | 1 | ||
| 21 | File | roundness,semi-circle,flat,square,triangle | Each 2 | ||
| 22 | Assorted set of files | 2 sets | |||
| 23 | Screwdriver | cross 125mm;minus 125mm | each 1 | ||
| 24 | Pointed plier | 150mm | 1 | ||
| 25 | Steel wire clamp | 200mm | 1 | ||
| 26 | Carp clamp | 200mm | 1 | ||
| 27 | Oxygen watch | 1 | |||
| 28 | Acetylene watch | 1set | |||
| 29 | Welding wire clip | 500A | 1 | ||
| 30 | White glass | 10 | |||
| 31 | Protection glasses | 1 | |||
| 32 | Steel brush | 1 | |||
| 33 | Emery cloth | 46#;80#;120# | each 10 | ||
| 34 | Metric fixed wrench | 10/set | 1 set | ||
| 35 | Metric ring wrench | 10/set | 1 set | ||
| 36 | Wrench | 8";10";12" | each 1 | ||
| 37 | Round head hammer | 1.5 pound | 1 | ||
| 38 | Welding torch | 1 | |||
| 39 | Cut torch | 1 | |||
| 40 | Oxygen tube | 30m | 1 | ||
| 41 | Acetylene tube | 30m | 1 | ||
| 42 | Hand electric drill | 220V 3-19mm | 1 | ||
| 43 | Jack | 10T | 1 | ||
| 44 | Socket wrench | 8mm-32mm | 32/set | ||
| 45 | Cut clamp | medium-sized | 1 | ||
| 46 | Welding gloves | 1 | |||
| 47 | |||||
| 48 | Work Light | 1 | |||
| 49 | Welding mask | 1 | |||
» IV. SHIPPING:RORO/BULK VESSEL/CONTAINER
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.
CONTAINER: The truck is put into the container. This model is used for small model trucks
Why choose us?
Experience
More than 15 years experience of production,sales,research and development in the field of special trucks.
Specialization
We can produce according to your demand, the material,the size, the color and the logo is optional for you.
Good quality
Has solid technology, advanced equipments;Reliant quality and flexible modes of operation also have strict quality control system and passed the iso9001-2008 and the 3c (china compulsory certification),with sgs,bv certifcate as well.
Chassis supply
We have a very good long term cooperation relationship with chassis manufacturer,such as dongfeng,foton,sinotruck,shacman,faw,hino,camc,north-benz,ect.
Production supply capacity
Company scale
More than 8000 employees with 1000 acres factory, total asset 2 billion.
We manufacture the truck as soon as possible once your order confirmed.And for the stock, we can delivery it immediately.
