Complaint
10MHz~2.7GHz Chinese handheld spectrum analyzer
Features:
Real-time spectrum analysis functions: real-time spectrum scan SPAN/RBW/CENT/MARKER function,MAXHLOD function,Maximum power automatic detection.
Frequency chromatogram function: show a period of time the whole time and frequency spectrum characteristics of recycled record all spectrum distribution within 5 minutes, facilitate the frequency interference to or launch leakage and other problems.
Heat map function: l spectrum shows that over a period of time spectrum overlap density contour, repetitions show tend to be more red, more facilitate spectrum statistical characteristics of analysis for a period of time.
Scope of application:
1. The application of operators can cover all sub-6g frequency bands, including all the frequency bands of 5g communication recently established (for specific frequency band allocation, please refer to the provisions of the radio committee or the frequency bands of operators).
2. In the field of industry , it can be used as exercise and battlefield electromagnetic evaluation, technical investigation, communication, radar, RF unit measurement and maintenance, etc.
3. In the field of live video, it can test live image transmission, wireless AP and walkie talkie, effectively avoiding interference sources.
4. In the field of radio and television application, it can be used as a monitoring tool for cable closed-circuit television signal, as well as for FM radio station, emergency frequency band and black broadcast.
7. In the field of UAV, such as industry UAV Communication and interference test, consumer UAV signal test.
8. In the field of wireless audio, such as stage, concert and evening party, set microphone frequency planning, signal attenuation of RF cable, channel interference and signal coverage.
9. In the research, development, production and testing fields of the Internet of things, such as gateway and wireless module measurement, remote control, walkie talkie, wireless toys, etc.
10. In the field of on-board equipment, such as wireless vehicle key evaluation, on-board wireless equipment, tracker detection, vehicle electromagnetic interference and shielding test, and test tools of vehicle networking v2x.
11. Indoor subsystem: it can be used for indoor antenna distribution system test, wired test or wireless test.
12. Smart campus: it is used to test whether RFID wireless transceiver occupies the frequency band of government and enterprise units such as China Mobile Unicom Telecom, so as to avoid complaints caused by the same frequency interference.
Specifications:
PROJECT | PARAMETER |
model | WF1027 |
S11 (typical value) | -20dB |
Frequency range | 10MHz~2.7GHz |
In-band flatness | 1dB |
RBW | 3,5,10,20,30,50,100,200,300 and 500kHz |
DANL | -100dBm(typical value) |
Amplitude precision | +-1dBm |
Sweep time | 200ms |
MAXHOLD function | Support |
Reference level is ADJ | Support |
Display refresh rate | 5Hz |
LCD resolution | TFT 800×480 |
LCD size | 5 inch |
RF interface[ | SMA-K |
Spectrogram mode | Support |
Thermal spectrum mode | Support |
Built-in RTC clock | Support |
Battery capacity | 3300mAh(typical) |
Battery type | Panasonic 18650 lithium batteries |
Charging time | 4~5 h |
Charging interface | Micro USB interface |
Battery life | 9 h |
Overall dimensions | 135mm*101mm*30mm(Do not include the knob and the antenna height) |
Working temperature | -20~45° |
Storage temperature | -20~70° |
Signal measurement range | -100 ~ -15dBm (Large signal attenuator to enter) |
similar spectrum analyzer WF3060 30MHz-6GHz
