304 Stainless Steel Wire Rope Clip Clamp for Hardware Item for Wire and Cable

First, the category of wire rope clamp

1, according to the cross-section shape of the wire rope: there are circular wire rope and flat wire rope.

2, according to the cross-section shape of the wire rope strand: there are circular strands and special-shaped strands, can also be divided into: triangular strands, flat strands and so on.

3, according to the state of each layer of steel wire in the wire rope strand contact: point contact wire rope, line contact wire rope (including point line contact wire rope).

4, according to the cross-section shape of the steel wire is divided into: steel wire rope made of circular steel wire and steel wire rope made of special-shaped steel wire (such as sealed wire rope); According to the surface of the steel wire is divided into: smooth steel wire and galvanized steel wire. According to the mechanical properties of steel wire is divided into: special steel wire and No. 1 steel wire.

5, according to the number of wire rope stocks are divided into: single, six, eight and twelve, eighteen, thirty-four and so on; The first three kinds of wire ropes are composed of a layer of rope strands; Twelve and eighteen strands of wire rope are composed of two layers of rope strands; The thirty-four strands of wire rope are also called non-rotating wire rope.

6, according to the direction of wire rope lay and lay method: according to the direction of strand lay one right lay and left lay; According to wire rope lay method 1 - reciprocal lay (reverse lay) and the same direction lay (straight lay).

7, according to strength points: according to the nominal strength of the monofilament, the wire rope is divided into several levels. The grading standards of different countries are different, for example, China's round strand and shaped strand wire rope are divided into 140, 155, 170, 185, 200(kg/mm2), while Japan is divided into 135, 150, 165, 180(kg/mm2) round strand wire rope, Germany divides round strand wire rope into four categories: 140, 160, 180 and 200(kg/mm2).


Second, the use of wire rope clamp

1, the wire rope clamp should be the clamp holder on the working section of the wire rope, U-shaped bolt on the tail section of the wire rope.

2, the wire rope clamp shall not be alternately arranged on the wire rope.

3, the distance between the rope clips is equal to 6-7 times the diameter of the rope.

4. The use standard is GB5976-86.

5. When tightening the rope clip, it is necessary to consider the reasonable force of each rope clip, and the rope clip furthest away from the sleeve ring shall not be tightened separately first.

6. The rope clip closest to the ring should be as close to the ring as possible