Complaint
Durable Cast Steel Shot S390 Abrasive Used For Engineering Machinery Shot Blasting Machine Steel Shot
Steel shot abrasive is a type of abrasive media used for various surface preparation and cleaning applications. It is made from high-quality steel alloy particles that are formed into small, spherical shapes. These steel shot particles are then used in blasting processes to propel them at high speed onto the surface being treated.
Steel shot abrasive is known for its durability and high impact energy, making it an effective choice for tasks such as removing rust, scale, and old coatings from metal surfaces. It is commonly used in industries such as metal fabrication, automotive, aerospace, and shipbuilding.
| Category | (Steel Shot) Cast Steel Shot | |
| Chemical composition | Carbon(C) | 0.70~1.20% |
| Magnesium(M) | 0.35~1.20% | |
| Silicon (Si) | 0.40~1.20% | |
| Sulfur(S) | 0.05% | |
| Phosphorus(P) | 20.05% | |
| Average hardness(measured under 500g load) | Regular: 40~50HRC (377~509HV) | |
| Special: 52~56HRC (543~620HV) | ||
| Special: 56~60HRC (620~713HV) | ||
| Hardness deviation | The maximum deviation range is ±3.0HRC or +40HY | |
| Microstructure | Uniform tempered martensite or tempered troostite + diffusely distributed carbides | |
| Minimum density(Measurement by alcohol displacement method) | 7.2g/cm3 | |
Here are some common applications of steel shot abrasive:
Cleaning and Removing Rust: Steel shot is frequently used to clean and remove rust, corrosion, and scale from metal surfaces. It can effectively strip away old paint, coatings, and contaminants, leaving a clean and bare metal surface.
Surface Preparation for Coating: Before applying paint, coatings, or other protective finishes to metal surfaces, steel shot blasting is often employed to create an anchor pattern or profile. This profile enhances the adhesion of coatings, ensuring they adhere securely to the substrate.
Deburring: Steel shot abrasive can be used to remove burrs and sharp edges from metal parts and components, improving their safety and functionality.
Shot Peening: In aerospace and automotive industries, steel shot is utilized for shot peening applications. Shot peening involves bombarding a metal surface with steel shot to induce compressive stresses, which can increase the material's fatigue life and resistance to stress corrosion cracking.
Surface Texturing: Steel shot blasting can be used to add texture or patterns to surfaces, such as for decorative purposes or for enhancing grip on industrial equipment.
Cleaning and Descaling Foundry Castings: In foundries, steel shot is used to clean and descale castings, removing sand, scale, and other debris from the surface of metal parts.
Cleaning and Preparing Welded Joints: Welded joints often require cleaning and preparation before further processing or inspection. Steel shot abrasive can effectively clean and profile weld seams.
Shot Blasting of Concrete: In construction and renovation projects, steel shot can be used to remove old coatings and contaminants from concrete surfaces. It can also create a rough profile on concrete for better adhesion of epoxy coatings or overlays.
Shot Blasting of Ship Hulls: In shipbuilding and maritime industries, steel shot blasting is used to prepare ship hulls for protective coatings and anti-fouling paints, ensuring the longevity and performance of the vessel.
Cleaning and Restoring Historic Structures: Steel shot blasting is often employed to clean and restore historic buildings, bridges, and monuments by removing old paint, corrosion, and environmental deposits.
Mold Cleaning in Die-Casting: Steel shot is used to clean molds in die-casting processes, ensuring the quality of cast parts.
Cleaning and Reconditioning Automotive Parts: In the automotive industry, steel shot is used to clean and recondition engine components, transmissions, and other metal parts.
Zhengzhou Xinli Wear-resistant Materials Co. Ltd.
Founded in 1996, Zhengzhou Xinli Wear-resistant Materials Co. Ltd. Is a professional integrative enterprise specializing in R&D, producing, and selling various wear-resistant materials. Such as white fused alumina, white corundum powder, alumina powder, white aluminum oxide powder, green silicon carbide powder, brown fused alumina, brown corundum powder and other wear-resistant materials. With about 25 years experiences, Zhengzhou Xinli has become the first enterprise that achieves the original crystal granularity to standard 0.3μm, can gain the effect of metal mirror polishing. Xinli Wear-resistant Materials has complete inspection equipment and quality control system, and obtained ISO9001:2015 quality management system certification.
Factory Advantages
Zhengzhou Xinli Wear-resistant Materials Co. Ltd. Is located in Zhengzhou, Henan Province. With the advanced production equipment and testing instruments, the annual sales quantity of the wear-resistant materials reaches to 3,000 tons. Now, factory equip 3 sets integrated smelting furnace, 2 sets 12000V magnetic extractor, ball mill, barmac, air flow mill shaping machine, and 3 production lines. The wear-resistant materials produced by Xinli are widely used in the sandblasting, grinding and filling of semiconductor, hardware, machinery, electronics, glass and paint industry. Xinli can supply the different standards of the wear-resistant materials, such as PEPA,JIS and ANSI etc. The product quality can take the place of parts of imported materials.
Company Vision
Insist on innovation, standardized and refined production, help every customer use the quality-stable and preferential price products are the goal that keeps Xinli moving forward.
1ton/jumbo bag
Jumbo bag + Wooden pallets
25kgs/bag, 40 bags/jumbo bag
25kgs/woven bag or kraft paper bag
All package can be customized according to customers' requirements
Q: Are you a trading company or manufacturer?
A: We are a manufacturer enterprises of abrasives over 20years.our products have competitive price and quality guarantee. Welcome to send your inquiry!
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but you need to pay the cost of freight.
Q:How can I get the new price of a product?
A: Please provide the exact or approximate quantity, packing details, destination port or special requirements, then we could give you the price accordingly.
Q:How do you manufacture abrasives?
A:Grinding → Wet classification (granulation) → Drying → Bagging.
Q:Is the quality of the abrasives okay?
A: We have the quality control system ISO9001:2008, and it's been followed strictly. We also have the professional QC team, and each our package worker will be in charge of the final inspection according to the QC instruction before packing.
Q: How long is the lead time?
A: Except OEM products, generally 5-7 days for trial order, 10-20 days for mass order once deposit received.
Q:How about your after-sale service ?
A: If any technical or quality problem after you receive the cargo, you can contact us any time.If the problem caused by us, we will send you free goods for replacement or refund your loss.
Q:What is the price?
A:Please feel free to contact us using the Price / Quotation Request Form as it depends on the quantity, etc.
Q:Can we have a visit to your factory?
A:You're warmly welcoming to visit our plant. And please inform me of your scheduled time in advance, we'll pick you up and arrange the agenda for you.
Q:Do you have any experience with exporting?
A:Yes, We have a global sales network reaching all around the world.
Q:Can I use my own design package?
A:Yes, The package can be with your logo.
