Swancor Chempulse 901 Bisphenol-a Type Vinyl Ester Resin for Anti-Corrosion Boat Building

Min.Order: 200

Product origin: Changzhou, Jiangsu, China

Infringement complaint:

Complaint

US$ 2.83 ~ 2.85

Description

Swancor 901 Bisphenol-a Type Vinyl Ester Resin for Anti-Corrosion Boat Building

Product Description
SWANCOR CHEMPULSE 901 is a Bisphenol A type epoxy vinyl ester resin. It is a premium resin with improved reactivity and purity.
It provides excellent corrosion resistance to a broad range of organic and inorganic acids, alkalis, oxidizing chemicals and salt solutions etc.
It also provides very good mechanical strength such as tensile and flexural while incorporated with reinforcement such glass fiber, carbon fiber
or kevlar fiber etc.
SWANCOR CHEMPULSE 901 is designed to provide superior toughness with excellent fatigue resistance due to high heat distortion temperature.

NOTICE IN USE
1. If SWANCOR CHEMPULSE 901 is blended with
cobalt-salt promoters, shelf life will be shortened. Promoted SWANCORCHEMPULSE 901 must be used within three months.
2. The gel time of SWANCOR CHEMPULSE 901 is affected
primarily by catalyst concentration and temperature. The
variations of cure characteristics may be caused by the
variations of catalyst, humidity, pigment, fillers and other
additives. It is recommended that the fabricators check the
cure characteristics with a small quantity resin before
proceeding for bulk production.
3. SWANCOR CHEMPULSE 901 contains organic solvent
(styrene). Keep away from heat, sparks and flames.
4. SWANCOR CHEMPULSE 901 is a potentially reactive
chemical. Please store it in dark and keep away from heat
and direct sunshine.
5. Containers, not completely emptied must be closed
immediately after use.

Features

Lower viscosity I.e. Better fiber wet-put.

Less or no DMA is needed I.e. easier formulation and cost saving.

Lower casting color I.e. better see-through for bubble checking.

Lower exotherm I.e. less cracking, less cycles and quality improvement.

Longer shelf life I.e. better inventory control.

Product Parameters

*1 Measurement was obtained under 25°C.
*2 LVT-#3-60rpm@25°C.
*3 6%Cobalt: 0.4phr, 100% DMA: 0.05phr, Andonox LCR: 1.2phr @25°C
Typical clear casting properties of cured resin

Property	Measurement	Test Method
Tensile Strength(psi)	11000-14000	ASTM D638
Tensile Modulus(×1000000 psi)	4.8-5.2	ASTM D638
Tensile Elongation(%)	5-6	ASTM D638
Flexural Strength(psi)	18000-22000	ASTM D790
Flexural Modulus(×1000000 psi)	4.5-5.2	ASTM D790
HDT*4(degree)	105-110	ASTM D648
Barcol Hardness	32-38	ASTM D2583

*4 Cure condition for HDT: 24 hours at room temperature then 2 hours at 105°C.

Applications

Chemical storage tanks, pipes, fume gas desulfurizing systems (FGD), scrubbers, ducts.

Corrosion resistant flooring while incorporated with aggregates.

Waste water treatment systems.

Food storage tanks and pure water system.

Marine use for yachts and boats.

Company Profile

FAQ

Q1. What is your MOQ (minimum order quantity) of products?
A:For our resin order, MOQ is 4 drums per spec, 200kg/drum, 4 drums/pallet, totally 800kg.

Q2. How can I get a Swancor resin sample from you to check quality?
A: You can tell us the Swancor specification and sample quantity you need, generally 1-3kg free resin sample, needing 3-4days work days to prepare, then deliver it to you.

Q3. What about your delivery time? Can we receive the resin on time?
A:For resin, we will finish the production and all the export documents usually around 3-5 weeks after order confirmed. Exact delivery time depends on order quantity.

Give us a chance, and we' ll return you with satisfaction.