Complaint
1. GA600AC Sliding Gate Automation Kit is suitable for powering the opening and closing motion of gates up to 600kg in weight, up to a length of 8m.
2. Gate motion is achieved by the rotating output gear of the gate opener driving the gear rack (sold separately) fitted to the moving gate.
3. The gate opener requires you to press the remote control once to open, and once again to close. This is a safety feature to ensure safe operation.
4. The opener must be fitted within private property, never externally to a property's boundary.
| Model | GA1000AC |
| Power Supply | 220VAC/50Hz 110VAC/60Hz |
| Motor Power | 400W |
| Weight | 16kg |
| Overall Dimensions (L×W×H) | 292×241×299mm |
| Gate Moving Speed | 11-13m/min |
| Maximum Loading Weight | 1000kg |
| Remote Control Distance | ≥ 30m |
| Remote Control Mode | Single button mode / Three button mode |
| Limit Switch | Spring(Mechanical) limit switch / Magnetic limit switch |
| Working Noise | ≤ 60dB |
| Working Duty | S2, 20min |
| Working Temperature | -20°C ~ +70°C |
| Recording of up Remote Controls | 25 |
| Remote Frequency | 433.92 MHz |
DIP Switch Adjustment
| Number | Function | Description |
| 1 | Slow Start Function | OFF-enable; ON-disable. Default OFF |
| 2 | Limit Mode Switching | OFF-normally open limit; ON-normally closed limit. Default ON, used with motor limit status, not recommended to be modified by the user |
| 3 | Automatic Close Time | Automatic close time setting: the gate is operated to open by remote control operation and will close automatically after a few seconds delay. 3 OFF 4 ON: automatic close delay time is 12s. 3 ON 4 OFF: automatic close delay time is 24s. 3 ON 4 ON: automatic close delay time is 36s. 3 OFF 4 OFF: no automatic close function. Default setting: 3 OFF 4 OFF Disable the automatic close function. |
| 4 | ||
| 5 | Auto-reverse Function | OFF-enable ON-disable Default position is OFF, this should align with the opener status and is not recommended to be modified by the users. |
| 6 | Remote Channel | OFF - single channel ON - Three channels |
Potentiometer Adjustment
VR1: Stall Force Mode: When Stall Force Mode is enabled (Dip switch 5 is at OFF position), the gate opener will detect obstacles and impacts to the gate. If this is during opening, the gate will stop, if this is during closing the gate will stop, and then re-open. Rotate VR1 clockwise to increase the stall force, anti-clockwise to decrease.
VR2: Brake Force Adjustment
For adjusting brake force at the limit position during gate opening and closing. This should only be adjusted for heavy gates that need additional force to brake when limit switch is detected.
VR3: Slow Stop Width Adjustment
This switch controls how many seconds the gate opener operates at maximum speed. Rotate VR3 clockwise to increase, rotate counter-clockwise to reduce.
VR4: Motor Output Force Adjustment
For best performance, set the torque at the lowest setting for secure use.
Rotate clockwise to increase, counter-clockwise to decrease.
Additional remote controls: Spare/Additional remotes for the automatic gate kit, these will need to be paired to the motor.
Infrared photocell: Detects pedestrians, vehicles and objects that cross an infrared beam and prevents the gate from closing.
Wireless keypad: Allows secure access through the gate used with a user set code.
Wired control: Allow users to control the opening and closing of the door through an external push-button.
Alarm lamp: Alerts people near the gate and users that the gate is in operation.
Wifi module: Allow users to control the opening and closing of the door through an app on the phone.
Our main business is divided into three sectors.
