Complaint
Fiberglass alkali-resistant mesh is on the basis of C-glass or E-glass fiberglass woven fabric, then coated with alkali-resistant liquid. It possesses properties of high strength, good cohesion, and anti-alkali. Thus, fiberglass mesh is the ideal construction material for EIFS (exterior insulation and finish system), widely used for wall reinforcement, roof waterproof. It can also reinforce cement, plastic, bitumen, plaster, marble, mosaic, etc. It is also known as soft steel bar.
Fiberglass mesh is a neatly woven, crisscross pattern of fiberglass thread that is used to create new products such as tape and filters. When it is used as a filter, it is not uncommon for the manufacturer to spray a PVC coating to make it stronger and last longer. The most common place to find fiberglass mesh is in tape products.
Drywall finishers use the mesh frequently. In fact, it is common to replace the paper tape used to float the joint between two pieces of drywall. The mesh that drywall finishers use comes on a roll just like paper drywall tape. The added benefit for the drywall finisher is to roll out the mesh over a great distance before having to apply the first coat of joint compound. Not only does it help them in this manner, but it also causes a stronger bond between the joint compound, the tape and the wall.
| Material: | Fiberglass Yarn |
| Coating: | Latex, Urine Glue |
| Weight (grams/sq m): | 45g- -300g/m² |
| Length: | 10m-300m |
| Width: | 4.5cm-2m |
| Color: | White(standard), blue, green, orange, yellow, oem |
| Mesh Size | Density(grams/sq m) | Width(m) |
| 10X10mm | 70,110,150 | 4.5cm-2m |
| 5X5mm | 70,110,125,145,160 | |
| 4X4mm | 125,145,160 | |
| 4X5mm | 125,145,160 |
1. Wall reinforced material (such as fiberglass wall mesh, GRC wall panels, EPS insulation with the wall board, gypsum board, bitumen)
2. Reinforced cement products.
3. Used for Granite, mosaic, marble back mesh etc.
4.Waterproof membrane fabric, asphalt roofing.
5.building sealing tape
a) 75g / m2 or less: Used in the reinforcement of thin slurry, to eliminate small cracks and scattered throughout the surface pressure.
b) 110g / m2 or about: Widely used in indoor and outdoor walls, prevent the various materials (such as brick, light wood, prefabricated structure) of treatment or caused by a variety of expansion coefficient of wall crack and break.
c) 145g/m2 or about: Used in the wall and be mixed in various materials (such as brick, light wood, prefabricated structures), to prevent cracking and scatter the whole surface pressure, especially in the external wall insulation system (EIFS).
d) 160g / m2 or about: Used in insulator layer of reinforcement in the mortar, through shrinkage and temperature changes by providing a space to maintain movement between the layers, prevent crack and rupture due to shrinkage or temperature change.
Packaging Details 1. packed with plastic bag. 2. shrink wrapped and wooden pallets. 3. packed with carton. 4.packed with woven bag. 5. 4rolls/6 rolls per carton
1. Could you provide free sample?
