Brief Introduction | Rotary dryer is widely used to dry materials in industries like cement, mine, construction, chemical, food, compound fertilizer, etc. Thermocouples are installed in feeding and discharging units to control temperature. Temperature change of the dryer also can be indicated by the thermometer, which is convenient for temperature control inside the dryer ( it is usually 250-350ºC). |
Applications | Powder & particle: Sands, limestone, stones, clay, mineral filter cake, coal, iron sulphate, filter cakes, fly ash, gypsum etc. Damp and sticky material: Coal slime, sewage sludge, bentonite, Kaolin etc. |
Features | 1.International standard with ISO, CE certificate. |
2.Simple system, safe and easy operation. | |
3.Flexibility in fuels used (NG, Oil, Coal ect.). | |
4.Year of experience with all types of dryers. | |
5.Capable of installation anywhere in world. | |
6.In house engineering for custom fit applications. | |
7.Proven design. |
Model (TengyiDa) | ø1.4mX12m | ø1.6mX15m | ø1.9mX16m | ø2.2mX18m | ø2.5mX18m | ø2.5mX22m | ø2.8mX23m | ø3.4mX30m | |
Capacity(t/h) | 5.4 | 6.6 | 13.5 | 19.8 | 25.6 | 31.5 | 41.4 | 80.0 | |
Evaporation moisture capacity(t/h) | 1.2 | 1.9 | 3.0 | 4.4 | 5.7 | 7.0 | 9.2 | 17.7 | |
Moisture content of raw material(%) | 55-60% | ||||||||
Evaporation moisture capacity(t/h) | 20-25%(adjustable) | ||||||||
Drying Temperature(°C) | 850±100ºC | ||||||||
Total Power(KW) | 65 | 115 | 138 | 170 | 240 | 320 | 450 | 680 | |
Total Weight(KG) | 25000 | 48000 | 67000 |
| 92000 | 110000 | 150000 | 265000 | |
Plant Area(M*M) | 6m*18m | 6m*18m | 8m*24m | 10m*24m | 10m*30m | 10m*36m | 10m*36m | 10m*48m | |
Except above models, we also can supply special model according to your requirements. |
Chemical analysis was carried out on the material inspection, according to the requirements of GB700-2006, dryer drum thickness < = 20 mm we use Q245 - A, > 20 mm we use Q245 - B; According to the GB/T 2970-2004 class ii, the range of 60 mm weld edge every board before cutting for ultrasonic flaw detection.
The dryer cylinder section for toroidal welding, longitudinal along the entire circumference of not more than two weld article number, and shell welds shall be full, the minimum is not lower than the parent metal surface, the top should not be higher than 3 mm, feed plate weld should be smooth.Weld edge bite depth should not be greater than 0.5 mm, continuous length should not be greater than 100 mm, should not exceed the total length of each weld bite edge which 10% of the weld length.
Point 3-InspectionExamination all the parts according to the drawing after processing completion. Spraying primer, rust preventing paint, and heat resistance paint. |
FAQ:
1.How to choose you dry equipment?
A: At first, please inform us what kind of material you need to dry.
Second, you should inform us how much output you need per hour.
Third, what kind of heat source you have(Electric heating/oil furnace/gas furnace/coal furnace/stream)
2.Can you provide plant layout?
A: Yes, we can provide. Our clients should provide the CAD drawing and pictures of the scene. According to the CAD drawing, we can design the reasonable layout.
1. Pre-sale services:
Act as a good adviser and assistant of clients
(1) Select equipment model;
(2) Design and manufacture products according to clients' special requirement;
(3) Train technical personnel for clients;
2.Services during the sale:
Respect clients; considering every aspect and details for our customers
(1) check products ahead of delivery;
(2)keep costumers informed about the delivery process
3. After-sale services
We promise excellent after-sale service!
(1) Assist clients to prepare for the first construction scheme;
(2) Install and debug the equipment;
(3) Train the first-line operators on site;
(4)Take initiative to eliminate the troubles rapidly at site;
(5)Provide maintenance for big items.
And other rational requirement brought up by our clients.