All lithium batteries on the market should be charged with a special charger for lithium batteries. If not, your battery will not be fully charged, or it will be damaged.
charger for use with LiFePO4 and LiMn2O4. DC input voltage provides 18-90VDC, and rated output voltage is DC 12V 20A. Intelligent stages charging with CC, CV. For 12V LiFePO4, CV value is 14.6V, and 12V LiMn2O4 (3 series) is 12.6V. After reaching the CC value, the charger will down the charge current to 10% charge current, there will have no float charging, it is professional for lithium batteries charge.
Special design for LiFePO4 and LiMn2O4 batteries CC/CV Value.
Full charge current design and efficiency up to 96%
Provide LV, OT, OC(@CC model), and short circuit protection.
DC output terminals diversify, suit for any battery system.
Advanced switching mode power supply technology.
Waterproof, Dust-proof, Shockproof design suit for much environment.
Super capacitor 0V start charging.
Provide LED to show charging state, Compact and light weight, natural cooling.
2 years limited warranty
Model | WG8-36BC12R6210 |
Input rated voltage | 12v/24V DC |
Input voltage range | 8-36V DC |
Efficiency | >95% |
Output voltage | 12.6V DC |
Output current | 10Amps( constant current output) |
Output rated power | 126Watts |
Load regulation | < 2% |
Ripple (Full load test) | < 100mV |
No-load current | < 20mA |
No-load loss (Watt) | 0.72 ~ 1.44 |
Working temperature | -35ºC~ +80ºC |
Waterproof rating | IP68 |
Over-voltage protection | YES |
Over-current protection | YES |
Over-temperature protection | YES |
Short-circuit protection | YES |
Machine size | 74*74*32mm |
Weight | 300g |
Heat dissipation method | Die-cast aluminum housing Natural heat dissipation |
| |